Search results

I finally decided to go with the 315x35x17's and discount tire no longer shows them on their website. I see that summit sells them but they are almost 20 bucks more than what discounttire had them listed for. Thanks, scott

its a 94 subaru legacy, twin turbo, AWD, Auto, japan spec. I've always had a wagon fetish and this thing is pretty fun to drive as well :D anyone know anything about these cars? Mods, performance, and such?

I don't want to buy a complete cat back since i'm running turn downs but these are the only thing i can find and they say they are for fox bodies. http://www.parts123.com/parts123/yb.dll?parta~dyndetail~Z5Z5Z50000016a~Z5Z5Z5ABBXF~P52.95~~~~S23N12I5X688106139936b~Z5Z5Z5~Z5Z5Z50000016a...

Well i disconnected my Air Bag sensors when i installed my intercooler and now my Air Bag light flashes when the ignition is turned on. how do i make it go away? Thanks, Scott

I've been having a really hard time getting a belt to fit since i took out the smog pump and ended up finding one that would fit but only if I run the Underdrive Pulley on the Crank(smaller than stock) and the stock pulley on the water pump (smaller than U/D one). Will this cause damage to my...

How long is the Pro tube? and has anyone used the Cyclone? That is all i need (mostly the length part). Thank you, Scott

does it come with everything you need or do you still need to buy the steering shaft to make it fit? Thanks, Scott

what size socket or wrench do i need? nothing i have seems to work and my adjustable wrench won't gripp it either. Thanks, scott

Well it has begun first off i will recap what has been done so far to make it fit; the ABS module has been moved under the frame to make way for the cold pipe coming off of the turbo, the sway bar had to be removed because the drivers header was hitting it, the starter wire and clutch cable...

How do you like them and would you recomend them for a stang that will still get plenty of street duty? Also i was looking and it looks like you can only get a 20:1 ratio, is that right? thanks, scott

i want to change over to the fox timing cover and water pump and get a march alternator bracket to clean up the engine bay. i'm going to get rid of the power steering as well. my question is i know that the fox pump rotates the oposite direction, is there anything i have to do to make it...

Well, I have Flowmasters dumped right now and i want to change out to the quietest possible mufflers i can get. Right now i barely drive my car since i don't want all my neighbors to hate me for warming it up in the morning. but if i could get some quieter mufflers i think i would enjoy my car...

well it's finally here after almost 6 Months of waiting :bang: I'm moving houses this weekend so i probably wont have time to install it for a couple of weeks but atleast it is finally here! I just hope it fits!

Well they are in! A guy i know who works in a fabrication shop did the adapters for me. they sit a little higher than I'm used to so i might end up buying the seat rails from cobra later on(we'll see if i can get used to it). I'm short so it's a little awkward with the seats being higher...

I just need the seat rails for them now :nice:

what would cause my speedo gears on the speed sensor to keep stripping out? I had gears put in about 20k miles ago and they put a red one in and it got chewed up. I replaced it with the white 23 tooth one which was dead on for the 3.73's but it got chewed up after a week! :bang: what would...

Ok I found a couple cobra seats that i really like on ebay.co.uk they are vinal though, and my question is what do you all think of vinal Vs. leather? here are the two different seats..... black vinal daytona's...

I'm looking into some aftermarket seats and want some info from those that have them. I want to know what seats you have and how you like them. Pictures of them installed would be great as well. Right know I think my top choices are summit sport seats and corbea forza's. does anyone know how...

I'm planning on getting a 6 pt. roll bar that will make me legal to 10.0's but living in england and being paid in us dollars means i will be paying double for the labor. Both bolt in and weld in 6pt. roll bars are legal for 10.0's so what are the disadvantages of having a bolt in roll bar...

where can i buy a new 5 way switch for my tweecer RT?