Search results

  1. E

    Whats that part called?

    Trying to find the metal spacer that goes in between the steering rack bushing and the bolt that holds it to the cross member. anyone know where i an get one?
  2. E

    Carb leaking out secondary shaft

    seems a little risky. its only leaking when the the squirters pump fuel in and hits the throttle plates and runs through the baseplate out the carb. i would say everytime i pump the carb full open it leaks about 2-3 drops of fuel onto the intake manifold.
  3. E

    Carb leaking out secondary shaft

    didn't think there were alot of miles on it. guess i was wrong. bought it used.
  4. E

    Carb leaking out secondary shaft

    i have a speed demon 750 and there is a leak on the shaft that runs through the carb on the secondaries leaking on the side of the fuel inlet. the shaft just controlls the diaphram on the secondaries. anyone else have this problem?
  5. E

    1969 short deck 351w stroker?

    i think they are going to be .05 out. can't i just go with a thicker gasket?
  6. E

    1969 short deck 351w stroker?

    i have a 1969 short deck block, and also have a 383 stroker for that. I was wondering if i am going to have problems with my short deck height. what precautions need to be taken? thanks mike
  7. E

    383 twin turbo head

    im just worried about having to run alot more boost to compesate for the vic's not flowing as well. they are 210cc and 2.05 valves that only flow 291cfm compared to the 300+ with the smaller intake runner with a larger 2.08 valve.
  8. E

    383 twin turbo head

    absolutely. 351w based. i was thinking about victor jr's because of the 1280 price tag, but if i will leave something on the table. i will go with the 205's mike
  9. E

    383 twin turbo head

    haven't posted up on here in a while, but here goes. i am wondering what head would be a nice street/strip head to go with for a 383 8.5:1 twin turbo. cam will be done by ed c most likely. i know that there is a guy on here that is running a 393 twin turbo with afr 205 heads, and several other...
  10. E

    BOV question

    BOV will work on turbo but not supercharged cars.
  11. E

    BDS blower

    cant use it with the ol eec IV but i definately can use it with efi, and i sure would. a 10-71 bds would be good for about 1500 which would tear up some ford racing blocks, and a dart sportsman. im definately not planning on making this much power, but i do want to be at about 700 or so.
  12. E

    BDS blower

    a bds will make enough power to split an aftermarket block, and basic kits start at like 3500 which is cheaper than any turbo kit you will find to make that power.
  13. E

    BDS blower

    anyone running a bds blower? im assuming not but i have to check anyway. im bouncing turbo and bds back and forth, its time to buy and i was just looking for imput. this is all for 351 by the way. mike
  14. E

    going supercharged

    i have a powerdyne and wish i would have went with something that is a little more cabable. if you are just looking for 9 psi or so on the street, its AWESOME. (im selling my setup if you are interested)
  15. E

    powerdyne interchange for s trim

    i have a powerdyne bd11a unit on my 94 5.0 and a experienced local mustang tuner said that an s trim will swap right in for the bd11-a head unit. does anyone know if this is true for a FACT or not? i know that the oil lines would need to be ran and maybe a different charge tube. but i was...
  16. E

    cryo experts

    cryo treating has been around for a while but not really talked about, i dont know why. Cryo treatment is a proven treatment for strengthening bare, pure metal. most problems in cryo treating used engine parts, is people will get a block, crank, rods etc cryo'd but there will be impurities in...
  17. E

    Where to put Vacuum line through firewall

    ive got an adjuster there so there is no room, i ran the line through the fender then passes through the door, no obstruction from door closing then tucked under the panel right by the windshield.
  18. E

    Where to put Vacuum line through firewall

    Where is a good place to pass a vacuum line through the firewall. are there any good existing holes with a gromet that i can just slip the line through as well? mike
  19. E

    Car doesn't start....sometimes

    Are you sure its a ground? could it be the starter. i try to start the car i get one click then all power in the car is gone for about 10 seconds then it comes back on. battery voltage is still at 12.85. then when power comes back on i try to start it i get one click, loose all power then comes...
  20. E

    Car doesn't start....sometimes

    i bought a new battery and my car started fine for about 10 days or so. no problems, now it is doing the same thing.
Top Bottom
Back
Forums
Menu