Search results

  1. stonegod85

    threw some codes after oil change

    yeah....i'm thinking bad gas as well. i know for a fact the MAF isn't dirty nor did i touch the o2 sensor wires. i'll fill up with some BP or Exxon next time!
  2. stonegod85

    threw some codes after oil change

    that's what i was thinking too....paid more money to help it run smoother and gets ALOT more rough! fuel system was cleaned a year ago and i only put 93 in it so i doubt i need to change the filter or clean the injectors again.
  3. stonegod85

    threw some codes after oil change

    so i changed my oil 4 days ago. i went with castrol syntec vs. going with the usual synthetic blend. everything was just as smooth as usual, but now i threw two codes P0172 and P0175 (system is running rich on both banks). i don't get how this is possible. but 2 days ago i filled up with the...
  4. stonegod85

    p.i. swap difference?

    peice them together...get some nice used PI heads, intake, and vt n/a cams and a tune. that will probably run you just at $2k and set you at around 280RWHP. then do some common bolt-ons along the way and you should easily hit 300! good luck
  5. stonegod85

    Procharger Advice

    i'm looking into a procharger my self. my buddy has a renegade d2 he is selling but i can't find any info on it, apparently this unit isn't listed on procharger's website:shrug:
  6. stonegod85

    coilover noise - help please

    well when you go from stock struts to ajustables, alot changes! the noise, in this case, can be a factor. if you set the struts to harder than stock they won't dampen as much which can create a harder ride and more road noise. if you set them to drag race (softer than stock) then you have more...
  7. stonegod85

    96-97 stb fit 99-04??

    i took mine off, noticed a weight difference on the scale.....no handling changes. i think it's better to not have one as it is less hassle to get to the engine components. just my thoughts though. thumbs down for useless stb's.
  8. stonegod85

    coilover noise - help please

    what is the spring rate? if they are 250 lbers then that is how it will always be until you buy some adjustable struts (10 way strange i recommend) then you can set the struts to drag and they will be a little quieter. BUT if they are 175lbers like mine, i don't know what that could be as mine...
  9. stonegod85

    magnapacks or borla stingers

    YAYYYYY.....that is the sound i was looking for. SWEET! i can't wait now. mine should sound even better since i put the more restrictive IAC gasket. POP POP POPOPOP.
  10. stonegod85

    magnapacks or borla stingers

    are those borla stingers? they sound a bit quiet for an o/r x...my o/r h and 40 series flows are louder on my 2V. oh well too late now. i'll just dump them if they aren't loud enough for me. or possibly sale them and get some magnapacks, as they are definitely louder than my current setup.
  11. stonegod85

    magnapacks or borla stingers

    that link isn't working for me....besides...i want to hear what either sounds like with O/R H Pipe! if not, i'll post mine up once they get in.
  12. stonegod85

    magnapacks or borla stingers

    that sounds like a thousand claps per second! craziness. surprisingly i kinda like it! but i've already bought the stingers and that paired with my O/R H should sound pretty nasty...i can't believe no one else has a borla stinger paired with an o/r h!
  13. stonegod85

    magnapacks or borla stingers

    a buddy cut them off his cat back system and is selling them to me that way...i'm fine with that, as i prefer weld-ins anyway. and i'll be able to keep my stock ss pipes with the borla sound this way. i've thought about it, and if they aren't loud enough for me i'm just going to put dumps on...
  14. stonegod85

    magnapacks or borla stingers

    which one do you peeps prefer....i'm on the hunt for a new sound. A BETTER SOUND, A LOUDER SOUND, but still cheap. that is why i'm just purchasing the mufflers and welding them into my current setup...o/r h, stock flow tubes and tail pipes. help me out people! -Gus
  15. stonegod85

    a few pinion angle questions (kinda)

    so basically i just need to correct my pinion angle by adjusting using a device that attaches magnetically to the crank pulley that will show the pinion angle in a more precise manor?
  16. stonegod85

    anyone have MAC Pro Dumps

    i want to hear some sound clips of a Mac Pro Dump setup....preferably with an O/R H but i'll take what i can get. thanks folks, Gus
  17. stonegod85

    shift kit

    the first link is the one you want....you won't be dissapointed...just set the kit up for full race w/ retained auto shift and you'll be VERY happy!
  18. stonegod85

    Best bang for the buck mod?

    gears!
  19. stonegod85

    a few pinion angle questions (kinda)

    so i got my double adj steeda uppers and weight jacker lowers in. i set the pinion angle to what might be -2* according to steeda's instructions on the length of the uppers, but i don't think that is precise at all. i've got the measuring tool to find the pinion angle through the crank, so that...
  20. stonegod85

    new pro products 2V intake

    i have a buddy getting it...he's number 6 on the AFM list. as soon as it comes in we are bolting it up and dynoing it. he's got all the boltons and it will be on pi heads and cams. he has his heart set on this intake and we have big expectations from what the guys over at AFM have spoken with us...
Top Bottom
Back
Forums
Menu