Search results

I doubt that will happen cause im gonna put some goodies in this honda!!!!

Well the 95 gt was a lil wore out when it came to power and it had a bunch of problems that would have cost me an arm and a leg to fix and to be honest the car just wont be worth it in the long run Also with 200 horsepower stock it is very quick and VERY good on gas!!!!! I have...

Well guys i stabbed all of you in the back. I got rid of my 95 gt and got a 2001 honda prelude sorry

Maybe you have Lil John hanging from the bottom of your car!!! YEEEEEEEAH!!!!!

ditto on needing the thermostat the backpressure is needed for proper cooling i had the same problem with my engine overheating with the ac on at highway speeds my problem was my cooling fan plug was not making good contact because it was getting hot and burning up the terminals in the...

the bad bulb could be the problem but a diode is in line with that circuit not a resistor the diode acts as a check valve for electricity check the bulb and the diode

ditto on the fuse not blowing!!!! Im gonna try to figure this out something must be done I'm sick of all these mod mustangs running around cool all day!!!! I work as a mechanic for a company that stresses we work with what we have versus buying a bunch of crap so I must put my mind to...

from what i can see is that if you leave the car running and you push on the connector the fan will come to life but when you let go it turns back off what i was thinking is that the little tab that holds the connector on should be placed closer to the center of the motor so that the plug will...

i had the recall done on my car about 3 years ago and the same terminal that was burned up on the motor and the harness was burned on the circuit breaker that they put between the motor and the harness

I just repaired the cooling fan plug with a new harness but it keeps burning out one of the terminals and causing the fan to shut off and my engine to overheat!! I want to see if anyone has come up with any good ideas to remedy this Im not talking bout ghetto rigging it with switches and...

:scratch: :bang: what is the best/easiest way to change the balljoint on the driver side of a 2001 mustang gt please help im totally lost

my bad I thought is was just cobras

my brother just bought an 01 gt and i was doing a little pm to it and noticed it had a cobra hydroboost unit. that told me that it had a cobra engine in it before. well the abs light stays on all the time and i wanted to know if it had anything to do with the hydroboost unit

Find a late 90's early 2000's mazda protege It has a din pocket that i used in my stang and it has a cool automatic swing up door!!! fits great and looks sick

For the rear mach box just use some pioneer 6X8's they will get the job done

Here is my two cents I originally installed and aftermarket deck in my stang and used the adapter that probably everyone has used and the mach system was really boomy at low levels and when i cranked up the volume it would cut out. I decided to install a few 10 inch subs and an amp. When...

Does anyone know of a good place to get replacement license plate lamp fixtures. Not the lens but the part that the bulb plugs into. The ones on my 95 and my sisters 03 are all melted and won't make good contact. Here in central texas the cops look for any reason to pull you over so i need to...

It sounds like it comes from the bottom of the car and i can feel it in the floor boards when it pops. It kinda of confuses me cause it sounds like it coms from the front but front different sides then it sounds like it comes from the middle of the trans tunnel.

My gt AODE makes a wierd shaking and rattling noise when i am driving. It happens kind of sporadically. It feels like driving a manual tranny car too slow in a higher gear. I also have that wierd popping noise on take off and coming to a stop so when the tranny starts to do the shaking thing i...