Search results

  1. 199

    considering a 90-93 Mustang GT what to look for?

    I'm considering buying a 1987 to 1993 Mustang GT I prefer a 90-93 (that what im searching for) What are things I should look for, do they have any known rust location like 60s mustangs. how should I evaluate it if its good or bad, what to look for, common problem etc... I don't have...
  2. 199

    64-66 Mustang 24" Radiator Conversion DIY

    if you guy don't mind giving me you input http://www.stangnet.com/mustang-forums/833107-bigger-radiator-66-mustang.html
  3. 199

    Bigger Radiator in a 66 Mustang

    So I decided since I need to replace my radiator I’m going to upgrade it to aluminum and use a bigger sized radiator 20" or 24" from 67+ mustangs, the car doesn’t have an a/c at the moment and I would like to install one soon. My question is do I go with a 20" which will require minor...
  4. 199

    Vaughn Gittin Jr Mustang hat?

    any luck finding it?
  5. 199

    1966 Soft brake pedal is this normal?

    I got a better angle, I will contact the mechanic today
  6. 199

    1966 Soft brake pedal is this normal?

    does that mean the smaller one on the left is for rear and the bigger one on the right is for the front?
  7. 199

    1966 Soft brake pedal is this normal?

    So I checked the brake fluid reservoir, I assume that's low, so im guessing there is a leak somewhere, I will try to get a mechanic to come and inspect it. The fluid has to be to the top?
  8. 199

    1966 Soft brake pedal is this normal?

    my car was parked for approx 2-3 months on a sloped ramp, now the brake pedal seems to be soft. It feels like when i first installed the new disc brakes 7 months ago,, they eventually became harder. Is it normal did the car leak brake fluid is it possible the brake hard lines cracked...
  9. 199

    Anyone with Carfax account? Can you run a report for me?

    I am looking into buying a car anybody has an unlimited account who can help. Please PM me Thanks
  10. 199

    How to install a second Water Temp Gauge on a 66 289 (Sunpro CP7983)

    I dont but will this work? Mustangs Unlimited - The Premier Source for Mustang, Shelby and Cougar Parts and Accessories This is my thermostat housing
  11. 199

    How to install a second Water Temp Gauge on a 66 289 (Sunpro CP7983)

    That doesn't seem to be like a stock manifold
  12. 199

    Running Hot after temp sending unit installed

    I just finished installing a fan shroud and a lower hose spring and I changed the thermostat (195) recently and it seems to to make a big diffrence I will put on a new radiator cap also. While the engine is idling the radiator runs at 195 degree F using a thermometer in the radiator, seems good...
  13. 199

    How to install a second Water Temp Gauge on a 66 289 (Sunpro CP7983)

    My stock temperature gauge doesn't work, my car seems to run okay now but I have no idea other than putting a thermometer in my cars radiator while idling. I would like to install the Sunpro water temperature gauge that I recently bought. The current sender on my car seems to be a 65 style thin...
  14. 199

    Running Hot after temp sending unit installed

    I will order an aftermarket gauge, but how would I know if the car is over heating or not without a gauge let say if im driving it. are there any symptoms to watch out for. This is my first classic car im used to new car with actual readings, I dont want to be careless an drive the car when...
  15. 199

    Running Hot after temp sending unit installed

    Im going to go mad :( Long story short, I ordered an fan shroud and thermostat and gasket and even a water pump, the order is delayed and i dont know when i will receive them. anyways I couldn't wait til my parts come so I did alot of search on the net for thermostats and realized ACDelco...
  16. 199

    Running Hot after temp sending unit installed

    Im waiting for my thermostat and water pump, just wondering would I be able to use the same belts? do I have to adjust them etc... or do I just remove them and reinstall them? what I want to know is it an easy and straight forward job replacing the water pump?
  17. 199

    Running Hot after temp sending unit installed

    Im really new with working on cars, It would be really helpful if u can direct me to aftermarket gauge and sender etc... and how i would go about installing it (as in having the original and aftermarket), Im looking for something affordable if you can find it from mustangunlimited maybe sunpro...
  18. 199

    Running Hot after temp sending unit installed

    Does that mean my gauge is not working properly?
  19. 199

    Running Hot after temp sending unit installed

    This is the information I got from the 1966 Shop Manual can some explain the open and full open on Low and High
  20. 199

    Running Hot after temp sending unit installed

    So i decided to have another look at my heating issue with the feedback I received. I got myself a digital thermometer made a simple holder for it - pictured below, Topped up the coolant The starting temp of radiator coolant was at 92F with the engine off I started the engine (cold start)...