Search results

  1. Black95GT_Kid

    build help

    FRPP cams have always been a good choice and trusted but there are better options out there. My suggestion would be to contact Lunatti. Their website has an option where you send them your info on your build and what you want from a cam and they send you their recommendation. I have used this...
  2. Black95GT_Kid

    strange strut noise?

    i have the hotchkis plates already. unless mine are worn somehow then i wouldn't recommend them as a fix for your car. I was thinking about the tape option too glad to know it doesn't work now lol
  3. Black95GT_Kid

    strange strut noise?

    Friday I installed Eibach lowering springs rear upper and lower control arms and Strange struts and shocks. Now the car make an awful rattle from the struts. After a little research Im discovering that the struts are slightly undersized and cause a rattle when used with caster camber plates. So...
  4. Black95GT_Kid

    cobra r hood?

    thats the one I've been looking at
  5. Black95GT_Kid

    cobra r hood?

    yea now that I got the hood figured out, now I have to figure out where to get the cobra bumper. seems like everyone under the sun makes one except Cervinis.
  6. Black95GT_Kid

    How do I take out this interior trim piece?

    nice work! can't wait to see how yours turns out.
  7. Black95GT_Kid

    cobra r hood?

    thanks for the info guys i think I'm gonna go with the Cervini hood.
  8. Black95GT_Kid

    How do I take out this interior trim piece?

    no sorry didn't get to it. wish i did tho.
  9. Black95GT_Kid

    A/c Issue

    another way is to get a hand vacuum pump which will also work as a gauge for testing, but u can apply vacuum to each line leading away from the control head. each line should hold vacuum. if the needle drops or wont pull vacuum u know the line that has a leak
  10. Black95GT_Kid

    A/c Issue

    vacuum gauge. u can get one at most auto part stores. check for vacuum at the head and trace it through the system like an electrical issue. your vacuum reading is like a voltage reading. if u have 20 in the the start of the line u should have it at the end. if there is a complete loss there is...
  11. Black95GT_Kid

    A/c Issue

    so its not just in the 2 a/c settings is in all mode settings? could b a linkage problem. might be binding somewhere.
  12. Black95GT_Kid

    How do I take out this interior trim piece?

    what paint were u going to use i saw some interior lacquer paint from latemodel that seems correct but wasn't sure. not trying to hijack ur thread just curious
  13. Black95GT_Kid

    rock auto cobra bumper?

    yea that was pretty much my concern. thanks for the advice on my threads.
  14. Black95GT_Kid

    cobra r hood?

    yea I was checking that one out too they claim to make the original. does that hood have the vents like the Cervini hood?
  15. Black95GT_Kid

    How do I take out this interior trim piece?

    I have the same problem with my car. That piece I believe is part of the entire package tray. I haven't tackled the project yet but I might this weekend if I have time. Ill let you know if I do and ill try to take pics for u as well.
  16. Black95GT_Kid

    cobra r hood?

    Im a little confused about the Cervini's Cobra R hood. I have seen it advertised as a 3.5 in raised center and the factory hood as a 1.5 inch. I did a quick search and was not able to find a clear answer for my question. So my actual question is weather or not the Cervini's hood is taller than...
  17. Black95GT_Kid

    rock auto cobra bumper?

    ok thanks for the advise. Im not the one doing the work but i don't want to pay more labor for a poor fitting piece.
  18. Black95GT_Kid

    rock auto cobra bumper?

    Has anyone else checked out rock auto for a cobra front bumper cover? Ive found that they have one for $135. Im not a body expert, so does anyone have experience with rock auto body parts?
  19. Black95GT_Kid

    Couple simple projects I am working on

    I put those pedal covers on my car 7 years ago. I love the look and have yet to have a problem with them. The brake and clutch are just a bit of a pain to put on properly. I found that heating them in hot water and dish soap make the job a lot easier!
  20. Black95GT_Kid

    Where to get white face gauges

    i just bought a cobra cluster off ebay. kinda pricy when u can find them but the fit and finish is a lot nicer than an overlay. jmo
Top Bottom
Back
Forums
Menu