Search results

  1. bso

    2.2 KB 94GT

    Don Lasota has very usefull info about kb blowers for our cars. I used him for chip burning last summer and questions regarding proper install (great guy). http://www.lasotaracing.com/tech.html Regarding the EGR, it is mounted on the elbow, but that is hot gas entering the blower. IMO I...
  2. bso

    94-95 sway bars

    You might have a fox front swaybar. It is shorter.
  3. bso

    Need to vent...damn MSD coil

    I got a 10 year old Mallory coil.
  4. bso

    kb 2.2

    I've read in moduluar forum discussions that kb does not recomend Meth on their blowers due to the gaskets being used inside the case.
  5. bso

    Is there a trick to gettting the computer back in the kick panel?

    use a small zip tie for the white plastic support.
  6. bso

    JLT cold air...Will it suck up water with the filter placement??

    I run a K&N Drycharger net on my Pro-M 80 Filter that sits all the way on the bottum. ATV's use the same set-up to keep water out of the intake.
  7. bso

    97 Cobra STB fitment...

    It will hit the top corner on the intake by the driver side. I made a 98 Cobra brace work on my car by having that part of the brace pocketed by .5" deep and 3" long. I have a Kenne Bell under it now and running my throttle body cable through that space.
  8. bso

    Wiring Diagram for Fuse #8 94 GT Vert

    Controls vanity mirrors, drop down visors and check that the wiring is not pinched or broken in the headliner.
  9. bso

    Strut tower brace for Cobra intake

    If you can find a 96-98 Cobra brace cheap they will work as well. You will need to pocket the corner between the intake and the brace on driver side about a half a inch. This brace works well with a KB on our cars too.
  10. bso

    KB 1.7 KIT Dizzy advance

    Follow this link for the Kenne Bell non-mentioned install advice. Don knows his stuff when it comes to KB install and tuning. http://www.lasotaracing.com/tech.html
  11. bso

    KB 1.7 KIT Dizzy advance

    http://www.schwarzmann.com/ Goto to the garage section
  12. bso

    magnapack

    The magnapack cat-back has different bend on the intermediete pipes and the muffler pipes has a small bend at he axle side.
  13. bso

    Rear seat bottom, stuck!

    Hit it square on with a flat head screwdriver to compress it.
  14. bso

    are 3 1/2 tips to big

    I had 3.5" tips on my Mustang with the Mangaflow cat-back. I think they look better than any other tips I have seen. Unfortunetly I took them off to make the panhard bar fit.
  15. bso

    Steering wheel play 1". Can't find source.

    One of my favorite steering mods has been the Steeda Billet Swaybar Mounts. They tightened the steering alot, but I can tell now how bad a stock steering rack is compared to more refined automobiles. Ex. BMW's or EVO's
  16. bso

    Do the FR500 Steering Wheels look good in a tan leather interior?

    I had an upholstery shop repaint my fr500 steering wheel to match the 94 Grey. Year later, it has been holding well. I do treat it with Lexol leather products regularly to keep it clean and conditioned.
  17. bso

    Parts store rant

    try: http://www.ronmorrisperformance.com/miva/merchant.mvc?Screen=CTGY&Store_Code=rmp&Category_Code=Fuel_Fittings%26Fuel_Line
  18. bso

    header problem

    Did you check to see if the leak is not at the EGR tube?
  19. bso

    Looking for CAI couplers

    You can purchase rubber exhaust tubing by the foot at a Boat Supply place. They come in different width and work real well for a CAI setup.
  20. bso

    What to change first? Intake, MAF, TB?

    MM full lengths tied in with custom jacking rails is my favorite mod so far. You will be suprised how much better a unibody frame feels with the existing hp.
Top Bottom
Back
Forums
Menu