Search results

  1. BNH4.6

    what can i get now ????????

    1. Mid-pipe 2. pullies 3. CMCV deletes 4. rear suspension work 5. 3500 stall. That is in order of cost factor, not bang for the buck!
  2. BNH4.6

    Umm, I'm new, and I'm an alcoholic...

    EvasiveS197, Thank you, I have not worked on that side of town. I'm a supervisor at the Jail, and funny enough I'm Azaroff's supervisor! My build plan was FRPP Hotrod Cams, Ported Heads, forged internals with a bump in compression to 11.1, stroke to 302 and finally longtubes and tune from...
  3. BNH4.6

    Exhaust help/opinion. I've seen the sticky

    Since power and drone are no issue, go with mac. They will be more aggresive than the flows. I got my Bassani race axle back from LMR for 330 shipped. I had straight pipes aka loudmouths and I didn't care for the sound, it was just to unrefined for me.
  4. BNH4.6

    Umm, I'm new, and I'm an alcoholic...

    Wow this is great, I'm glad she got a good owner and I'm glad the dealership was at least half way honest with you. I am a Corporal at the Cherokee County Sheriffs Office and my wife and I were expecting. I fractured both feet and tore the tendons in both of them and was out of work for six...
  5. BNH4.6

    Umm, I'm new, and I'm an alcoholic...

    Did you come to Georgia to buy that car? That is my old mustang I traded in at Cobb County Toyota, I told them to give the buyer my phone number if they had any questions. In the trunk was a set of flomaster axle backs, 4.30 gears new in box and the X-cal2 with 2 custom tunes from MPH. Tim...
  6. BNH4.6

    FINALLY

    I say 241 rwhp 284 rwtq, if I'm close do I get a beer? Good luck and have fun with your first dyno.
  7. BNH4.6

    For The Ricers

    Borla doesn't make headers for the 4.6 jackass!!!
  8. BNH4.6

    anyone in atl area?

    canton
  9. BNH4.6

    Missing shifter bushing/blue plastic on shifter ball

    Mine didn't have it, I looked it was not there. I got mine used and I know the person that had it before me had a shifter on it because there was very little sealant on the trans and it was scratched up like a razor had been on it. If you push my stock shifter to the right towards 5th-6th it...
  10. BNH4.6

    Help please!! Ripped off by dealer on 03 Cobra!!

    They are covering everything but I am so sick of taking it back. I just got it back today the clutch pedal still vibrates and sounds like a helicopter. Wed. it got a pressure plate yesterday a throwout bearing. It needs to go back but Iam sick of going in there!!!!
  11. BNH4.6

    Help please!! Ripped off by dealer on 03 Cobra!!

    I did the carfax before I bought it and they are paying for everything because it only has 13,000 miles on it. The carfax came up clean except for something to do with the heater.
  12. BNH4.6

    Help please!! Ripped off by dealer on 03 Cobra!!

    I got my Cobra 1 month ago and every since I bought it I have had nothing but problems. Oil leak from the valve covers, strange vibrations, spoiler on the rear loose/falling off, throw out bearing, pressure plate, something in the front end poping/creaking loud and yesterday I couldn't get it...
  13. BNH4.6

    99 gt faster than 04 gt?

    Call me crazy but I think they were or I just got a ringer. My 99 GT 5-speed with only a stock replacment K&N airfilter and weld-in flowmasters put down 238 rwhp and 279 rwtq sae. My 03 GT put down 242 rwhp and 280 rwtq sae with K&N cold air kit magnaflow x-pipe and a magnaflow cat-back. This...
  14. BNH4.6

    Long Tubes: Louder or quieter?

    Much louder at W.O.T with very little rasp. Very little drone at 2,000 rpm, idle is deeper but no louder than a stock car with weld-in flowmasters. The idle is much much cleaner and more refined than the stock manifolds. My best friend has a 04 Mach 1 with Pro-Chamber and Mac cat-back. Mine is...
  15. BNH4.6

    Magnaflow Magnapack Discontinued?

    I had the packs and I hated them. The car had the same tone from idle to 6 grand just louder. Those things droned more than my flowmasters and sounded like ass. This of course is my opinion.
  16. BNH4.6

    4.10's installed!!!!!!!!

    They either put 3.73's in or your speed cal is off because I am right at 2900 rpm at 80. I have checked various times because I hate it, I had Tim fix my speedo when I got my dyno tune and I have also been clocked by radar at 60, 70, 80 mph and the speed I was doing was what the radar read also...
  17. BNH4.6

    FM40's weld-in vs Catback

    The only thing you will notice is a slightly deeper/ louder sound. SLIGHTLY!! Power wise maybe 2-3 rwhp maybe.
  18. BNH4.6

    What Is "Break In" Period For New Gears?

    Same as above get on it!!!! I left from the gear install sideways. No problems at all.
  19. BNH4.6

    Another Exhaust Question..sorry

    I don't know about the loudest but my Dr. Gas flowmaster set up sounds mean.
  20. BNH4.6

    gears

    I don't know about shops in Texas but I paid $139 for my gears (Gene Evans ford in ga) and $200 for the install. I have had 3.73's and I now have 4.10's. If I were to do it all over again I would go 3.73's. Alot of people will say 4.10's and nothing less but for me I don't really care for the...
Top Bottom
Back
Forums
Menu