Search results

  1. B

    96, bad compressionleak down test

    Did you ever find out what the problem was with the car? I am having an identical problem. Car started then died and wont restart. I have spark, fuel pressure, ect. and all my plugs were soaked with fuel. I am curious to what your problem ended up being.
  2. B

    Where to plug in Mechanical Boost Gauge???

    It is a black line( not white) under the dash on the drivers side. It may also be on the passenger side but mine was located straight above the gas pedal, best bet is to pull out the gauge cluster, its only a couple screws.
  3. B

    Where to plug in Mechanical Boost Gauge???

    There is a small white plastic vaccum line running under your dash to your stock boost gauge. It is usually pretty easy to find if you crawl under there. I just got a small T fitting and sliced into that line. It seems to work great. If you cant find it just hanging under your dash you can pull...
  4. B

    New Tires for my '03...

    What set of 17 x 10.5 rims did you go with in the rear. I wanted the FR500's but I have heard they dont fit on the 99+ cobras.
  5. B

    cobra service manual

    I was just wondering if anyone knows if there is a service manual specificaly for the 03/04 cobras. Something that has all the technical specs for the whole car. Also wondering if anyone has some suggestions on any good performance books for the 4.6L cars.
  6. B

    Bassani

    P/N: 6229-1HKR Super Comp Ceramic Long Tube Headers P/N: 6229-HKR Super Comp Long Tube Headers www.holley.com
  7. B

    Bassani

    go with hooker headers, easiest ones to install and have a great sound. even though i have bassani on my car, bassani does nothing diffrent to there stuff than anyone else (almost) as far as headers and mid pipes go and they charge a **** load, all you are buying is a name.
  8. B

    Juice for my 03

    did you do a pulley swap? If so you have to change your program, i belive that most programs for the pulley advances timing and i think thats the last thing you want to do when spraying nitrous. As long as it wont put you over 550 hp your stock fuel system will be fine. Use a dry kit and spray...
  9. B

    Looking for some causes of backfire

    My neighbor recently bought a 96 cobra. It has 60,000 mi on the original motor. The dealer that he got it from told him that it had 400rwhp. I went over to check it out last night and I noticed that it has a CAI, underdrive pullies, off-road X pipe, and some flowmaster mufflers. Neither of us...
  10. B

    gauge hook-up

    Hey thanks, im not to fond of seeing flashing lights while im driving. Do you know if the IAT sensor is located after the blower and if so where at? Thanks for the advice.
  11. B

    gauge hook-up

    I have an 03 cobra and really want to know how hot the air that is actually getting to my heads is. Does anyone know where i can tap into after the blower to put a sensor for an intake air temp gauge. Also i wanted to hook up my a/f ratio gauge, does anyone know what wire off the o2 sensor is...
  12. B

    shifting problems

    I found the problem with my shifting, there was a TSB on 4-13-04 Transmission rattle noise or difficult to shift - tremec t56 6 speed manal Some 2003 - 2004 mustang cobra vehicles equipped with a tremec t56 6 speed manual transmission, may exhibit a rattle noise or a difficult to shift...
  13. B

    shifting problems

    I just tried pulling back on the clutch with it in first. It didnt do anything, no clicking sound but thanks for the great tip
  14. B

    shifting problems

    The car has almost 40,000 and the tranny and shifter are all stock.
  15. B

    shifting problems

    Thanks. The only mods as far as the engine goes is a bassani exhaust but i just put it on and the problem has been there before the install. Any help would be great.
  16. B

    shifting problems

    I recently bought an 03 cobra and ever since i got it i have had trouble shifting it. When i go to find a gear its like im running into a wall, it almost feels like the shifter it is hitting something. Another problem im having is that when i shift from first to second the car boggs way down...