Search results

  1. 9

    UPR BoostMaster Pipe

    I am looking at the UPR BoostMaster Pipe for my Vortech blown 331 and was wondering if anyone else has this piece and how well if fits a 94-95 car vs. an Anderson Power Pipe.
  2. 9

    Roller Rocker Question

    I am in the process of installing a new 331 shortblock that my builder installed a Crane Cam. The intake duration is 224 degrees and .542 lift, exhaust is 232 degrees and .563 lift with 1.6 ratio rockers. I have valve springs with a max. of .600. My question is: Is it safe to use my existing...
  3. 9

    Custom chip & PMS possible?

    I have a quick question. I installed a Vortech SQ, Trickflow heads, Performer intake, 80mm Pro-M, 70mm BBK, 42 lbs injectors on my otherwise stock shortblock. I purchased a Anderson PMS to tune it, but I am fighting getting it to idle and run well. I have been looking up past threads and have...
  4. 9

    got trouble codes with upgrades

    I have installed an Anderson PMS and PMAS 80mm MAF with 42# injectors along with a Vortech V-2 and TFS heads (stock shortblock and cam) I now have code 157 (MAF below min voltage) and 124 (TPS higher voltage than expected). I have tried resetting the throttle and has a decent idle @ 750-800...
  5. 9

    Installed PMS, etc, and now got t. codes

    I just installed an Anderson PMS, Pro-M 80mm calibrated for my 42lbs. injectors, TFS heads, Vortech V-2 and I'm fighting problems. I set up the initial program that Anderson Ford gave me for my car. I can't get it to idle below 1,000rpm (I have stock shortblock and stock cam) and it idles...
  6. 9

    the darn white smoke

    I installed a Vortech earlier this year. The first time out, I stepped into it a bit and it knocked like crazy so I got back out quickly. Brought it home and it was dropping a cylinder on the driver's side. I backed it back out the next day it here came the white smoke out that side. I took...
  7. 9

    AFR 185's on stock short block?

    Is anyone running Airflow Research 185's on a stock short block? I have read that there may be piston clearance problems with the 2.02 valves. I just installed a Vortech V-2 and took out a head gasket :nonono: on my otherwise stock longblock and want to install a 347 soon, but until then while...
  8. 9

    Will Lightning MAF with PMS?

    I just finished installing a Vortech S-Trim, 42lbs. injectors and 90MM Lightning MAF on mostly stock engine other than throttle body and Performer intake. I just got my PMS and faxed the sheet to AFMS to get the intial tune. I got back a sheet from Anderson saying that my MAF wont work and I...
  9. 9

    Vortech boost control needed with PMS?

    I am installing a Vortech S-Trim and I have decided to get a PMS to go with this install. Should I still install the ignition/boost control that came with the Vortech or is this just redundent with what I can do with the PMS. I already have a MSD 6AL and I'm running out of room under the hood...
  10. 9

    Vortech install questions.

    I am installing an S trim on my car. The motor is stock except for a Performer intake, BBK throttle body, headers and exhaust. I decided to install 42lbs. injectors and 90mm Lightning MAF along with the Vortech. My questions are: I will not need the FMU, correct? Should I use the T-Rex pump...
  11. 9

    missing / hesitating

    These forums have been great! I have gone through the not starting(stator) and the popping frontend(tighten the cross brace) easliy with past forums. The problem I currently have is the car randomly missing out. It seems most noticable at lower rpms going down the highway and underload. The...