Search results

  1. saleen308

    7.5 open diff problems

    I'm looking to buy a 1998 LX for my daughter. The guy says that the outer tire spins when the car goes around corners (when it's wet) and he has put new tires on it hoping that would solve the problem but, it hasn't. It is a 7.5 open diff with an auto trans. I have no idea of the gear size in...
  2. saleen308

    Returned to stock / throwing codes

    Their is no way the car would pass here with an o/r x-pipe. This was the quickest solution.
  3. saleen308

    Returned to stock / throwing codes

    The guy that bought my mustang has failed inspection so I told him to put all the stock parts back on. It now throws codes P2196 and P2198. The best of what I can tell is these are rich O2 sensor readings. My friend says he needs to drive the car at least 60 miles for everything to readjust and...
  4. saleen308

    Broken seat back release

    Thanks.:nice: I hate Fords fasination with cheap plastic:notnice:
  5. saleen308

    Guidance on replacing Shaker 500 headunit

    I replaced my head unit with a pioneer unit from Crutchfield. If your mechanically/electrically inclined it's no big deal. I have the Shaker 1000 in my car. I added on the bluetooth and ipod connections. Pretty straight forward.
  6. saleen308

    Broken seat back release

    The plastic handle on both of my seat backs has broken off. Is there a better after market one I can buy, maybe something metal instead of this cheap plastic?
  7. saleen308

    Aftermarket Spring Installation

    I used a spring compressor for my Steeda springs. I rented one from Autozone so the rental didn't even coat me anything. An air compressor will help speed up the process of compressing the springs. Enjoy:nice:
  8. saleen308

    rear end shifting

    I had something similiar to that happen and one of the bushings in my LCR was falling a part
  9. saleen308

    Failed inspection

    The inspector said that because my O2's sensor and heater where shut off and the catalyst sensor that the state computer failed my car. He said if I can get one of the three of these to be turned on, that I would pass. He said my county only allows 2 items to be turned off. He told me to think...
  10. saleen308

    Having problems with my BMR LCA

    Everything was greased and torqued properly. Just got off the phone with Brenspeed. They said I was one of the lucky ones that got a bad batch of BMR's LCA. The are sending me a whole set of brand new replacement bushings for free and priority mailing them. These guys ROCK!!!
  11. saleen308

    Having problems with my BMR LCA

    I've noticed recently that when I accelerate that the rear end pulls slightly to the right even under slight acceleration. I got underneath the car today to take a look. The front urethane bushing on the passenger side LCA was completely gone on one side. What would case this to happen? My...
  12. saleen308

    Lower Control Arms

    I put BMR's LCA with a Steeda Gtrac stage 1 suspension and it's awesome. No more wheel hop even with traction control on.
  13. saleen308

    Shaker 1000 upgrade

    Has anyone here upgarded your speakers on your shaker 1000? I changed the head unit so I can have blue tooth and ipod. I heard some good aftemarket speakers would make the sound even cleaner. What size are the speakers and subs on the shaker 1000?
  14. saleen308

    Best wax to use on a new car

    I like the Turtle wax ICE. Especially if I'm in a hury. Doesn't leave any white residue on the plastic pieces and on and off easy and can be applied in the sun.
  15. saleen308

    Need 4 1/2" Pins for my Cervinis hood

    I bought some from Jegs because I made the same mistake.
  16. saleen308

    Nitrous peeps, let's see your switch set ups

    LOL....I'll order it on Friday when I get paid.:nice: I saw one of your panels in a guys car at a street meet but, never had a chance to find out where it came from. This is the last piece I need before the install:flag: Thanks peeps :)
  17. saleen308

    What tires for 18x9.5 wheels

    I'd run 275/40/18 all the way around
  18. saleen308

    Nitrous peeps, let's see your switch set ups

    Nice set up but the drilling into the console has major pucker factor for me
  19. saleen308

    Nitrous peeps, let's see your switch set ups

    Nice! I emailed them to see if they'll do a 5 switch set up.
  20. saleen308

    Nitrous peeps, let's see your switch set ups

    I'm trying to figure out where to mount mine. I want something clean looking. I saw one guy that mount his switches in one of the cup holders. I had also thought about inside the arm rest and underneath my aftermarket head unit beacuse it has that open hole there. I'd like to have the...
Top Bottom
Back
Forums
Menu