Search results

Hi I've a 98GT but the build date is 10/97. I've swapped the 4.6 2v for a more powerful 5.4 4v and I want to upgrade my stock fuel pump. I had a deal on a walbro 255lph gss342 with the basket and all the wirings. I've also a t-rex 50gal/70psi in the garage. I want to know If the gss342...

Hi, I've a really strange problem with my mustang. I were able to drive for 17km without any problem then suddently the car wont start. It's cranking, cranking and cranking but it wont start. At first I tought it was the crank position sensor so i replaced it... no luck I verified, I've fuel...

Hi, i've a really strange problem with my mustang. I've swapped my 4.6 2v for a 5.4 4v. I've swapped the PCM of my old GT(98) for a Cobra(97) with an sCT chip with PATS off. I've drove the car for about 11 miles and then the car won'T start anymore ! I've fuel to the fuel rails, I've...

hi, I've receive a autometer Pyrometer gauge and... honestly i don't know how to read it... I know it's used to give what is the exhaust temp but... what's that mean? How I can interpret the reading? what's good and what's bad ? Can someone help me a little bit ? Thanks !

Hi, can I put a T-5 in a 98GT ? If yes, is it alot of trouble to install it? Thanks

Hi, I've had a nice deal on a forged 5.4L 4V . It's complet from the air filter to the oil pan. I want to know if I can keep my computer wiring and ECU(from a 98 GT 5spd) and be able to tune it just like my old 4.6L 2V. I also want to know if the motor mount will be the same ? Thanks

Hi, I've plugged my wideband on the driver side exhaust and the reading is around 15.5 - 14.5 at idle, 15.0 14.3 acceleration and 14.7 13.5 at wot I've a mac prochamber and no muffler... I've read somewhere that a no muffler setup can cause a lean reading but is it true? Should I buy a set of...

Hi, I'm planning to purchase Patriot stage 2 heads and I'm still not sure what cams to order. The Patriot Performance Modular Ford Billet 233/237 .545"/.550" 113 lsa or The Comp Cam XE274H ? Also, should Ii buy a adjustable cams gear or I can stick with OE cams gear ? Thanks

Hi, I want to get PI heads but I'm not sure where to start looking at ... I'm planning to get Cams and PI heads in same time. What I need ? Stage 2 from Patriot or FRPP High Perf. PI Head (not the production one) with which cams ? Do I need cam gear ? I need spring ? I need new set of valve...

Hi, I'm looking to get forged piston, maybe from DSS Racing or Probe. Any other suggestion? I want to use nitrous, maybe 125hp shot or 150hp ... I need forged piston, H or I beam, can I stick with stock crank ? What else do I need ? Thanks

Hi, since yesterday my 98GT began to "knock" when I drive. Today, the check engine lite and with my xcal2 it's give me the error code P0320. P0320 Ignition Engine Speed (PIP) Input circuit fault. What can I do to correct this? What cause this? My car run very fine 3 days ago and now I...

Hi, I really need a PI coolant tube to finish my PI intake swap. I've look at a Ford dealer and he can have this 3' long tube for..... 150$ CAD !! (about 145$ US) damn... If someone have this Pi coolant tube, the one that plug into the water pump and pass between the Intake Manifold and the...

Hi, I've all the stuff to do the PI swap.. except the gasket... can I re-use mine? or I need the NPI gasket(96-98) or the PI gasket (99-04) I keep my stock head (98GT) Thanks

Can I adjust the tire size ans the gear ratio with xcal2 ? I've a 98 GT 5spd and from what I've read, I can't with predator but i can with xcal or a speedcal. Should I buy this ? It's mainly for the tire size, gear ratio ( change to 3.73) and data logging. Thanks

I'm sure i've seen a article in MM&FF or Mustang 5.0l about a propane powered mustang and I've been interested but I didn't read the entire article. From what I've seen, the car have pretty good performance and was very safe. I've look on google but I didn't find anything really interesting...

Hi all, I don't know what to choose between FRPP "C" springs , short throw shifter (maybe tri-axe or Pro 5.0), Motive or FRPP 3.73 gears and a UPR O/R x pipe. I've a 98 GT 5spd ,a cold air intake, Zex dry kit + accessories on the way. What do you suggest to ask for? :) Thanks

Hello, i've a little trouble with my 98 GT manual. Since a couple of week, when i start my car the morning, there's a a strange noice coming from the engine. I've open the hood and listen and the sound seem to come from the strap. I've already get this kind of noise on my Eagle Vista 88 ,Ive...

Hello , I just started to customize my 98 GT stang and I'm not sure what to buy at first... I've removed my spare tire + I've done a rear seat delete setup and i've removed the air silencer (the ugly plastic piece that "strangle" air near air filter). I've buy a CAI on Ebay (i didn't...