Search results

  1. F

    Is backpressure overated?

    My 01 is stock except for dual cutouts and I haven't had any problems. I like it because its loud uncapped, but if I want it quiet for a while I just cap them up. You do take a hit in low-end power, though you do gain some up top.
  2. F

    Tapping Signal from Data Cable-Help?

    Anyone?
  3. F

    Tapping Signal from Data Cable-Help?

    I have some woofers and an amp from my last truck that I'd like to put in my car. I found an article about using a line converter to tap RCA signal using the data cable. Once I found the cable, it was obvious that the previous guy had spliced into it before, and even has the connector...
  4. F

    255/40r17's on stock?

    I just got new tires and went with 275/40s all the way around. No problems, no rubbing, etc. I have the stock bullits and they look good. 255 will fit easy but I'd go with 275.
  5. F

    Just bought deep dish bullitt rims..... now have a question and pics of rims...

    You can go bigger than 255 on the front. I run 275/40s all around on my OEM bullits.
  6. F

    Exhaust leak, or some other problem?

    Do you have headers? Maybe a leak there? Could even be a leak there with the stock manifolds. One could be cracked, loose, bad gasket, broken stud, etc... Have you looked for any visual signs of exhaust leakage anywhere?
  7. F

    Few Questions-Stereo Install

    Are these line converters generic, or is it something that will plug into an existing plug and pigtail off? I have read about tapping in around the trunk? Is that right?
  8. F

    Few Questions-Stereo Install

    I have 2 10" JL woofers and an amp to power them that I had in my last truck that I'd like to put in the new car, but have a few questions. I have never used the factory deck to wire up an amp. Is there already RCA jacks in the back of the Mach460 H/U? If not, I need a line converter? Also...
  9. F

    275 in front

    I just got a new set of tires on the factory Bullit wheels(17x8 I think) and went with 275/40s all around no rubbing even at full lock.
  10. F

    Problems starting

    I had a similar problem in my car two or three times, but it hasn't done it in a while. It would kind of stumble to a start after it set for a few minutes. My theory is one of the injectors is leaking into one of the cylinders and momentarily causing a rich condition in one cylinder and a lean...
  11. F

    Cutout Exhaust Question

    The car I just bought is used and is stock with the exception of two cutouts right before the mufflers. It is obvious that with them capped the car has much more low-end pickup. They didn't really sound that great to me uncapped anyway. It was too loud, and didn't have that Mustang tone that...
Top Bottom
Back
Forums
Menu