Search results

  1. M

    egr simulators and my check engine light

    i am wondering if the egr simulator is worht buying and can anyone tell me where i can find the meaning and how to fix the error codes that throw my cel on
  2. M

    Starting Block next month

    i plan on using a stock polished crank and scat i beams there only 200 and it would cost atleast a100 to redon your stock rods and 50 for new bolts. why not spend another 100 and buy something stronger and better
  3. M

    torque Boxes

    im going to be using upr non adjustable control arms and a guy over on mustang forums just installed his and said they where great
  4. M

    331 vs 306 wit spray

    yea based on what im using it is best to use a 306
  5. M

    331 vs 306 wit spray

    ive already had a blower not really to special. it def needs a rebuild cause the people that had it before me beat the hell out of it. and its seen better days i only plan on making 300-350hp
  6. M

    331 vs 306 wit spray

    Im looking to hear about the pros and cons of a 331 cause im thinking of making one for my 91gt as daily driver using a dss rotating assembly or possibly making a 306 with spray
  7. M

    What heads are these? NOT E7's! Big CP stamped on them, 2J10?

    i need a factory 302 crank rods oil pan and timing cover let me know what you have email me at [email protected]
  8. M

    is this too many miles

    is a 170k miles too many miles to get the factory crank and rods polished and reconditioned and turned
  9. M

    stock fuel rails and a motor flush

    how much hp can stock fuel injectors and fuel rails hold and i was thinking of doing a motor flush cause my car has 155k and what oil would be recommended i currently use royal purple 10w30
  10. M

    strange noise comming from the motor

    yea i checked the header bolts but my coil is also making a ot of noise its an msd tfi coil and i use 93 octane the noise seems to be coming from under the intake manifold
  11. M

    piston to valve clearance

    i am wondering if i can use an ecam with 1.7 or 1.7 rocker arms with stock pistons and how much hp can stock crank and connecting rods suport
  12. M

    strange noise comming from the motor

    Ive been hearing this weird kinda tapping sound or clicking kinda sounds like lifters might be bad or a valve tap but it doesnt get to much louder when i give it some gas and sometimes the noise isnt even noticable. if anyone has any suggestions on what to do to try and fix this please let me...
  13. M

    cam option

    I am thinking of using a B or E cam for my setup. its going to be n/a but might use nitrous. I need any suggestions on a cam to use . This is a daily driver and has to pass emisions. the setup im using is 306 from chp- cobra intake manifold-65 or 70mm thrrottle body-73 or 76 mm maf -24 lb...
  14. M

    Wicked Motor Sports

    Does anyone know where WMS is in brick? Can someone give me directions from Monmouth Mall???
  15. M

    Predator Article

    So do I advance both to max on the 1-4 and 4-7 on the tuner?????
  16. M

    Timing advance/retard

    So safely I can advance it to 10 or 15 or what?
  17. M

    Timing advance/retard

    With the diablosport tuner what advance degree should I go to for a saftey advance?
  18. M

    TPS connector color codes

    Can someone tell me what the color codes off a TPS connector for 2002 Mustang GT?
  19. M

    Bbk 75mm Tb

    How long do I have to disconnected the battery cables?
  20. M

    Bbk 75mm Tb

    I was wondering did u have to disconnect the negative and positive battery cables or just one? How long?
Top Bottom
Back
Forums
Menu