Search results

Sucks it had to be at the end of the year on a super cold day, 5° on a unprepped track, but hey, take what you can get. So for the first time at the track on the new combo I ran [email protected] on 18" drag radials. I'm pretty happy for my first real pass of the year. This is a manual car...

Finally got the chance to get my car back on Toma's dyno, he tweeked a bunch of stuff and got it ready to make a 15psi run. We didn't quite hit 15psi but got really close, roughly 14.7 to 14.85 psi on pump gas. At that psi the car made 592rwhp & 664.8ft/lbs of TQ :o Big thanks to Toma and...

If so, can you post some pictures of your car with them on? Thanks, B

Thought I would take some new pics of the car tonight. I'm a little camera happy...LOL

Right now I have no tach signal as the supposed "green" wire off the bigstuff doesn't seem to exist according to the instruction manual. Has anyone used the signal off the MSD box to their stock tach before?

What Manufacturer makes one piece headlights for 87-93 Mustangs Hey guys, I'm hoping one of you will know who the manufacturer is for these new one piece headlights I'm seeing being sold at a number of US retail stores. I'm trying to find out so our Canadian stores can stock them. So far I...

Well the spring is fast approaching and I figured its time to get things moving on stage III of my Turbocharged Mustang. This year will be another extreme jump in performance. Everything has been ordered and only time is a factor now. The new list of goodies. Ford R-Block Eagle...

I want to get some nice fabbed aluminum valve covers, but they only come in tall. I'm not sure if my intake will clear my stock hood if I put a spacer in? Anybody know if it will clear or not? These are the valve covers I want to use.

Hey guys, just thought I would pass on an invitation to anyone interested in showing off their car and meeting other car enthusiasts. Last years turnout was very good, over 60 cars. Go hear for the details... http://www.performance-shop.com/yabbse/index.php?topic=22397.0 Photos of...

Check out these custom pullies Check out these cool pullies a company in my home town makes for Mustangs and well pretty much any car on the market. Gotta love billet. http://www.performance-shop.com/yabbse/index.php?topic=22205.0 He has also produced some FR500 look-a-like pullies as...

It seems my stock ignition isn't doing the job. I was drivng my car yesterday and got into it in 4th. It was pulling hard when all of a sudden the car went dead, it was like hitting a brick wall. I instantly let off the gas and glanced at my fuel pressure guage. The car came back to life and the...

So I decided to have Toma (Turbo guru in my town) look at the car, seeing how he is the only guy around who has experience with turbo cars. He played around with the car for about an hour and came to the conclusion that my MAF numbers given with the meter were not correct. So he tweeked the...

Ever since I had a SPEC stage III clutch installed in my car it feels really clunky. When I drive or shift its fine but at lower rpm's and reverse it feels really sloppy. I get a lot of clunky sounds like there is slack in the drivetrain at low speeds ie. rolling and then giving it a little...

I've been having some issues with my aftermarket fuel rails. One of the injectors came loose under boost and spewed fuel everywhere. I'm assuming that the rails were not fastened down 100% and worked its way loose. But my question is this. The injector sits in the fuel rail a good 3/4 of an inch...

So we got the car on the dyno today. We had some issues with the electronic boost controller so we bypassed it for now. Final run we took the car up to 5300RPM's and made 428rwhp & 451 ft/lbs torque all this at 8.5lbs of boost. I decided that was enough horsepower for me :D We took it out...

I'm in the process of installing my PTK kit on my car and I've decide to upgrade the fuel system and because I am running a Holley Systemax II intake it doesn't give me much room for running lines? In fact the fuel rail touches the distributor on the one side. We are trying to figure out how...

Thought I would share the progress of my turbo install with you guys. The motor is getting new heads, intake, fuel system and more as well. Here is a link to the start of my venture http://forums.stangnet.com/showthread.php?t=420291 So the car went in on Thurs and things are progressing...

Words from a Ford employee...