Search results

  1. red05bullitgt

    Kudos To Steeda For Outstanding Customer Service

    I would just like to thank TJ, Rod and Glenn over at Steeda for providing outstanding customer support.. After I had purchased my Spyder wheels, I noticed there were 3 small chips on one of the spokes and a slight blemish on one of the other wheel's inside lip.. When I called Glenn over at...
  2. red05bullitgt

    Would The S-197 Look Better As A Full/true Fastback ?

    Just out of curiosity, I've often wondered as to whether or not, the current Mustang would look better as a traditional full fastback.. Some have mentioned in other sites that it would look more like the 67-68 fastback, while others have stated that a full fastback just wouldn't look right, due...
  3. red05bullitgt

    Has Anyone Encountered Hood Clearance Issues W/stock Gt Hood And Saleen S/c ?

    Has anyone experienced any hood clearance problems from installing Saleen super chargers on their 05-09 GT with stock hoods ? I could really use some advice and feedback.. Thanks !
  4. red05bullitgt

    Can An Airaid Cai Fit On A Saleen Series Vi S/c Without Requiring Fabrication Mods ?

    I recently came across a couple of images from someone on another forum who claims that an Airaid CAI will fit on a Saleen series VI S/C without having to make any modifications to the inlet tube in order to attach onto the throttle body while also clearing the upper portion of the alternator...
  5. red05bullitgt

    Cfm Billet Valve Cover Breather Kit- 2002-2016 Mustang Gt

    I came across the CFM billet valve cover breather that replaces the oil filler cap and from my understanding includes a one way check ball valve that's supposedly fully compatible with the factory PCV system and designed to stay completely closed during normal driving conditions while under...
  6. red05bullitgt

    Need Feedback On Saleen 98mm Airbox W/ Hard Plastic Upgrade Tube

    Guys ! I happen to be running a Saleen series VI S/C on my 2006 GT which was installed with a C&L racer inlet tube and pipeline 101mm MAF.. The car was already installed with both the S/C and C&L intake when I purchased it, but since I've owned it, I've noticed a few clearance issues with the...
  7. red05bullitgt

    Ford's 400HP 5.0 (Coyote) V8 spied !

    Although Ford has not officially confirmed this yet. Thanks to spy photo's from Left Lane News, we now have definitive proof that Ford's 5.0 400HP (Coyote) V8, does indeed exist. In addition, Left Lane News also confirms the 5.0 will indeed arrive in both the 2011 Ford F-150, and 2011 Mustang...
  8. red05bullitgt

    Would LCA relocation brackets eliminate/reduce wheelhop ?

    Just out of curiosity, I'm looking into purchasing a set of CHE, LCA relocation brackets. However I don't have any immediate plans to lower my suspension at this time. My question, is this. Would LCA relocation brackets either reduce or eliminate wheelhop, without having to lower my...
  9. red05bullitgt

    How to best avoid stalling/drifting from a dead spot while on a steep hill ?

    Although I've been driving manual's for many years, I still have problems whenever I'm at a dead spot on steep hills. So my question is this: What is the best solution to prevent from drifting back, and stalling the vehicle while starting out from a dead spot, on a steep hill ? Anyway, thanks...
  10. red05bullitgt

    Pics of my Mac Prochamber with high-flow cats

    Guys, just thought I'd share some pics of my Mac Prochamber with high-flow cats. Anyway, I finally decided to take the plunge, once I found out that MAC performance had discontinued them. Needless to say, after searching google for vendors. I finally located Laurel Mountain Mustang who had...
  11. red05bullitgt

    Steeda Ultralight vs. BMR springs, which has better ride quality, and less stiffness.

    Guys, I'm really caught between Steeda Ultralight springs, and BMR springs. Although both are very excellent products, I don't know as to which offers the best ride quality, and has the least amount of stiffness. So if there's anyone who happens to be running Steeda Ultralights, and or BMR...
  12. red05bullitgt

    Bullitt OEM strut tower brace installed

    Guys, here's some pics of my OEM Bullitt STB that I just got from a member on another website. Anyhow the member and I decided to swap braces, because neither his Bullitt brace was able to fit his GT500 hood, nor was my previous GT500 STB able to clear my stock GT hood. Needless to say, I...
  13. red05bullitgt

    Are 4v heads from the 03/04 Mach 1 compatible as a swap for our 3v heads ?

    Hope this doesn't sound like a dumb question, but could our 3v heads be swapped for 4v heads from the 03/04 Mach 1. That is.. providing their compatible, and are of similar design. :shrug:
  14. red05bullitgt

    Would the S-197 look better as a full/true fastback ?

    Hey everyone ! just out of curiosity, I've often wondered as to whether or not, the current Mustang would look better as a traditional full fastback.. Some have mentioned in other threads, that it would look even more like the 67-68 fastback.. while others have stated that a full fastback just...
  15. red05bullitgt

    Pypes Violators vs. Mac axle backs

    Hey everyone ! I'm currently running Pypes Violators with my stock H-pipe w/cats, and wanted to get some opinions as to whether the Violators or Mac axle backs are louder with the factory cats still in place ? Anyway as always ! thanks for all your feedback, and support in advance..:nice:
  16. red05bullitgt

    What exactly are BMR Lca's designed for ? please explain

    Hope this doesn't sound like a dumb question ? but what exactly are BMR LCA's, and what's their purpose ? I've never heard of these before, and am curious if they can improve RWHP and Torque curves at all :shrug: Anyway, thanks for all your feedback and support in advance...Rocky :nice:
  17. red05bullitgt

    can anyone help ? I think my dyno results may be off

    Hey everyone, I originally posted my dyno results from Powerhouse Automotive, in an earlier thread in which my results seemed a bit high at 301 max power and 294ft.lbs torque, for being a Mustang dyno..Although I now believe, that I may know why ? I recalled asking Mike from powerhouse, before...
  18. red05bullitgt

    Dyno results 301 rwhp/ 294 rwtq

    Hey everyone, finally got around to getting my Bamachip's 93 race tune and Steeda CAI dyno checked by Powerhouse Automotive..The results with just the CAI and tune before adding Steeda UDP's were 289 rwhp and 289 rwtq and then afterwards with the Steeda UDP's produced an additional 11 rwhp for a...
  19. red05bullitgt

    Pics of my 05 Torch Red GT

    I finally took the plunge and purchased a digital camera..Anyway here's some pics of my Torch Red..
  20. red05bullitgt

    Ford Racing Parts Warranty Program

    Just found about the FRPP FR1 power pack and FR3 Handling pack are now covered under warranty by Ford Racing Parts, so just thought I'd post it for those who may be interested..# FORD RACING IS PLEASED TO ANNOUNCE THE NEW WARRANTY PROGRAM Download the Ford Racing Warranty Statement (PDF file)...