Search results

  1. C

    engine question

    its just a stinkin gardener snake. it doesn't intimidate people. i got a friend that's good at reading the manual and he always talks trash and won't back it up. we were at a party and he kept sayin its a cobra you can't touch this and you see that snake that gives it 280 hp its a 99 by the...
  2. C

    Soo slow!

    im not a carb guy but i thought fuel pressure should be 6 to 7. what do your plugs look like and what number are they?
  3. C

    Right size injectors?

    you still have the lightning maf, if so and you want to sell pm me. thanks
  4. C

    Backfire through exhaust under load...

    sorry i lost track of the thread. open the computer and check the capacitor if they are leaking there will be black goop under them. my car was running great one day and like **** the next. also its hard to understand did you get the o2 fixed? basically what's all the problems that aren't fixed...
  5. C

    Who has ran into this problem????

    I have done done a 4 cyl conversion aod to 302 5 speed. The hole in the tunnel is different at the front but not necessary to cut. what's not fitting or hitting pics would be wonderful. thanks
  6. C

    Backfire through exhaust under load...

    well i just got done dealing with problems like these run good one start up run like **** the next. it was the capacitor in my computer. they were leaking its a totally different car now i love it. i chased this problem for two years
  7. C

    electric fan with coolant sensor ???

    My buddy drilled and tapped into the tube that goes to the heater core from the intake. He tapped it on the top of the hex part that screws into the intake. Looks very nice almost like its factory.
  8. C

    build advice needed

    I would stick with the trickflows either the cnc 205 or the fast as cast with a custom cam. Jay can set you up with the heads cam and valvetrain. For suspension baseline or team z is what i would run
  9. C

    Calling all tech wizards, here's a doozy....

    connect the spout while its running, just don't get too close to the belts or the fan (that's to cover my butt) and see what it does. i have heard the tfi can cause this problem somebody correct me if im wrong. and i realize you got a new dist
  10. C

    Really confused about my rear end/sn95 rear brake upgrade

    yes use the 8.8 hardline that runs across the axle then get the weatherhead adapters and connect the factory sn95 soft lines to the hardlines
  11. C

    90 GT Running rich, backfiring?? Help!

    Posted via Mobile Device when you check them again hit the throttle and see if you get any change from them
  12. C

    1991 331 stroker trick flow, will not run good

    Posted via Mobile Device sounds like your 180 out or degrees off on your distributor has to be timed on your compression stroke
  13. C

    Checked Codes tonight help me decipher please

    I just measured and everything is working correctly I think. Im preatty sure it is from my intake leak. My right O2 has all kinds of numbers between 0.2-0.9v My left one sits on 0.00-0.02 but you blip the throttle and it is all over the place just like the right but at idle or steady throttle it...
  14. C

    Checked Codes tonight help me decipher please

    Anyone? Where the O2 harness plugs into the main harness is there supposed to be two 12v source one for each O2? Or is there just one and it split in the O2 harness? Thanks
  15. C

    Checked Codes tonight help me decipher please

    Checked O2 sensors checked voltage at computer nothing on pin 43. pin 29 got voltage all over the place never stopped changing which is good but nothing on pin 43 where do i go from here?
  16. C

    My new project!

    What about behind all the panels you welded in you goin to somehow spray something in there? I have always wondered how people make sure it wont rust when they do that. It looks damn good though.
  17. C

    Checked Codes tonight help me decipher please

    wow that sucks ok i will check that tonight as long as i got voltage at the computer my power wire and ground is good right. or do you want me to check that to and make sure im getting the right amount of power? thanks
  18. C

    Checked Codes tonight help me decipher please

    I switched O2 sensors still a code 91 all other codes are gone didnt have it warmed up. I'm pretty sure its just an intake leak on number 5. Plug wasnt wet looked dark brown but thats because it running rich. Compression test was 160 that what the others are too. Did another cylinder balance...
  19. C

    Checked Codes tonight help me decipher please

    what kinda tool you use for leakdown test do they make one you can rent? i know it puts compressed air in the cylinder. thanks
  20. C

    Checked Codes tonight help me decipher please

    Used noid light tonight and injector is firing normally. not on when koeo but blinks when running. Didnt get time to check o2 will do tom. A family member have a stroke earlier this week so i havent had time. I guess i will try to check the rockers too see if one is slightly hanging open? i dont...
Top Bottom
Back
Forums
Menu