hi, i'm looking for a off the shelf cam MECHANICAL ROLLER for a 408 10.5 c.r , RHS alum heads 215, victor JR intake, 950 holley hp carb, 1 3/4 headers 3" exhaust, 3500 stall, C4 trans, 4.10 gear, 28" slick, the car weight 2970 pounds with driver...
but i need to get an other cam because the stock one has one lobe gone because of one tappet bearing so i need a good aftermarket one...
87FOXSTANG wich one you have in it?
hi, i'm building a 87 mustang GT speed density (no mass air) stock short block E7 heads ported with bigger valves 1.94 intake and 1.55 exhaust, 10.3 cr , explorer intake, 2.5 complete catback, manual trans, 3.73 gear, 1.6 rockers...
What cam can i use? of the shelf...
check bottle pressure it can't be over 1200 psi because the selenoid will not open if its over put ice over the botter until the pressures drops at least 1200 or the tps is not calibrated with the module check that with the ignition switch on push the peddal to wot and see if it activates you...
best clutch for 2005-2007 for 450RWHP and not to hard the pedal effort? on the older car i've heard the best one was spec atage3 on the new ones i've heard good about RAM but i don't know!
hi, i have 175 because i called zex they told me that it was ok, i have custom tune for that, the injectors are not maxing out but the pump yes the fuel press drops after third gear the fuel filter is new, zex told me i need a better pump or a BAP and my engine is perfect!
hi, my cousin is about to buy something to boost his engine he has forged pistons and rods he want to get around 600 HP to the wheel i'm looking for at least 14 pounds of boost but i cant decide centrifugal (intercooled), roots (intercooled) or Turbo kit
i've heard good things on Procharger...