Search results

  1. 302RollinHard

    393w vs 408w

    FordStrokers is a great place to buy parts. Jim is as honest as the day is long. I might go with the street fighter gt for the SRS pistons, though........ If you are going to buy a whole kit, don't sell yourself short on cubic inches. As a side note, ever think about buying a storker...
  2. 302RollinHard

    Fox guys with 351W and longtubes..need help

    what brand of headers are you using?
  3. 302RollinHard

    Alternator and Battery Question

    if you are running the 140A alt off of the stock pair of black with orange stripe wires, I would recommend you stop running it that way immediately as it poses a fire hazard. Those two wires aren't sized properly to carry that current load. You should run a 4 gauge fused power wire from the...
  4. 302RollinHard

    Wow I'm a Idiot...Head Gasket!

    Like I said (in edited post), if it is a torque to yield type bolt and you have a blower, I may just buy new bolts and do them over. I wouldn't chance reused bolts on a blown application. You only need sealer on the bolts that intersect the water jacket (lower ones).
  5. 302RollinHard

    Wow I'm a Idiot...Head Gasket!

    IIRC I think the outer bolts (the ones you can see after valve covers go on) are the ones that intersect the water jacket and require sealer. You can do them one at a time. I would do them in the opposite pattern that you torqued them down with. If they are torque to yield type bolts and you...
  6. 302RollinHard

    Quick story i wrote just now.

    It was a clear black night, a clear bright moon - Warren G was on the strip trying to consume - Some skirts for the night so I can get some funk- Just rollin in my ride chillin' all alone.
  7. 302RollinHard

    Florida 50 FTW.........

    So over the years I embarked on buying others unwanted but new aftermarket gauges. I finally had a complete collection (oil press (mech), water temp (mech), volts, fuel, tach, speedo) and decided to pull my gauge cluster out and fab up a plate to get them mounted. After many tries of getting...
  8. 302RollinHard

    Dual fan wiring/alt

    I agree with Hissin. I had to run a 70A relay to my single taurus fan. When the fan starts to turn, it can pull as much as 100A (IIRC) momentarily and then amperage draw decreases as the fans get up to speed. The good ole DC controller unit fixed all of that though.......
  9. 302RollinHard

    DAN CARLSON REALSPEED TERRIBLE EXPERIENCE

    You need to find another hobby. 460 bucks to take off an intake? You must have lots of money. I can have my upper and lower off in a bit more than an hour. Sheesh NY prices............
  10. 302RollinHard

    18" Saleen Wheels on a foxbody

    Those are some of the secksiest cars I have ever had the pleasure to view. What is it about a black mustang???
  11. 302RollinHard

    brake upgrade input

    I got the full monte MM stock brake upgrade (Hawk pads/shoes, steel caliper sleeves, braided stainless lines, etc) and can really tell a difference in the way the car feels during braking. The pedal feels alot more competent. It is a nice fairly cheap upgrade, if you aren't into going all out...
  12. 302RollinHard

    push rod length?

    ahhhhhhh just right. With that said I would rather the witness mark be A LITTLE off center and narrow than dead center and wide. Those images were courtesy of Joel5.0
  13. 302RollinHard

    push rod length?

    Any time you change heads, cam, and pretty much any valve train component, you should measure for PR length. http://www.compcams.com/information/Products/Pushrods/ Read up on this and ask questions if you have any. Anyone who tells you that "mine worked with the stock pushrods so yours...
  14. 302RollinHard

    Just ordered a pms

    I 100% agree with Jason. Get everything ironed out before you go and start messing with it. If your MAF is properly calibrated to your injectors and your O2 and other sensors and everything is all in check, I don't think it should run that bad. My stock a9l could handle my 351 in stock...
  15. 302RollinHard

    Been buisy lately...my good news bad news thread...

    You gots your priorities in order. That is fo sho. Sounds like you are gonna have your cake and eat it too......
  16. 302RollinHard

    If this ain't pimp, I don't know what is!

    I guess it is actually true--- Pimpin' ain't easy.......
  17. 302RollinHard

    Pics of Eibach Pro-Kit Please

    Thanks. The pro kit is a great setup.
  18. 302RollinHard

    EMERGENCY MY MUSTANG GT CONVERTIBLE APPEARS TO BE STOLEN SOMEBODY HELP ME QUICKLY

    ID you notarize the title? Usually the Notary (at the bank) keeps DL numbers or copies, so you at least have that going for you. Sounds like a trip to FL is in order.....ball-bats anyone???
  19. 302RollinHard

    white foxes

    :lol: :lol: :lol: :lol: :lol: Who didn't know that was going to happen--and it was still funny.:rlaugh: I think you did forget the ultimate white fox, though Strype.
  20. 302RollinHard

    Pics of Eibach Pro-Kit Please

    This is with ES isolators and new monroe sensatrac shocks/struts all around and a 351W. http://i241.photobucket.com/albums/ff280/bcriser/DSC01322.jpg