Search results

1993 stang with 2.3 T stock 2.3 downpipe with one cat and dual exhaust. Im looking for more torque should I gut the cat or put in a high flow for back pressure

Can anyone tell me where to get svo new or used alternator brackets, I have the part numbers but I dont know where to find them? I checked my local junk yard and theres no old svo's or T-birds. Im putting a manual steering rack on my 93 T and I need to use the old style alternator bracket that...

I have a 95 cobra 5.0 with 32k and the other night I was driving to the road and it just turned off so I pulled over and tried to restart it and it would just crank. Called the tow truck and when he got there I tried to start it again and it started. It starts when its cold and once it get...

I have an 88 turbo coupe motor in a 93 mustang with a 93 valve cover. I have a little air filter/breather and im having alot of blow-by what type of system do you guys recommend for containing all the blow-by oil.

I'm selling a 2.3 liter T-bird cam on ebay with valves, springs and the whole nine yards. And someone asked me what size the cam is? I guess hes asking about the lift duration ect?

I have a top mount intercooler on my 88 T-bird motor in my 93 mustang I have a tubular header on the motor. What can I do to get the inlet temperature charge down. Im going to rap the header. I have a ram air hood that lets plenty of air in. But my intercooler is always extremely hot??

what should my timing, and fuel pressure be set at if im running around 18lb of boost. 93 mustang with rebuild 88 turbo coupe with IHI turbo, roller cam, header and intake ect

I have a couple of wiring harnesses if anyone wants to buy them 93 mustang harness that I started doing the turbo swap on. 87-88 Turbo coupe wiring harness its missing the Distributor plug 87-89 2.3 harness has a few wires cut out Make me an offer and there yours ! I have an...

I want to change my power steering to a manual rack. I also am going to put the 5.0 brake upgrade, camber plates and replace all the front bushings. I was wondering what I need to do for the pullies since im going to get rid of the power steering pump?

i have 2 5 lug cobra R factory rims with bald kuhmo tires on them if any one is interested let me know.

I did a 2.3 turbo swap a while back and I had a weak injector pulse, I had a set of 19lb injectors laying around so I decided the put them in and see if anything changed. It did, I had a bright pulse (shown on the noid light) and it finally sounded like it wanted to start. I set the timing and...

did a turbo swap on a 93 and it starts but it dies after 20 seconds it will not keep running??? where should i start??

When you install a 93 roller cam into a 88 Turbo coupe motor do you have to change the cam timing(do i need to buy an adjustible cam gear)? This is for a 88 turbo coupe motor being swapped into a 93 stang.

This is the second time that i have done stingers turbo swap and i still have a weak injector pulse. Can someone tell me what wires i need to connect in the removeable part of the harness. I have spark but a weak injector pulse.

After doing the turbo swap which starter should I use on my car or does it matter? Are there any differences???

I have spark and for a while I was getting an injector pulse. I timed the car at TDC just to get it running. I have an LA2 computer with the brown top injecters and I was getting an injector pulse but after a couple of minutes cranking and no start the pulse went to a very dim pulse. The fuel...

After 2.3 turbo swap I have a weak injector pulse, I used a noid light to check to see if the injectors were firing. When I crank the engine it does not fire because of the weak pulse. I did have a strong pulse at one point, then I plugged the injector plug back into the injector and tried to...

Looking to buy a dual point distributer for a 2.3 mustang. Let me know

I have a 93 2.3 and swaped in a 2.3T from a T-bird, I followed Stingers wiring diagrams. when i tried to start the car it would not fire. i have fuel but no spark, i checked the pins for the computer to make sure the distributor plug and everything is wired right and that is fine, and my...