Search results

What i mean is, assuming you use the green stuff, how many gallons of actual coolant do you use in your car and what ratio of water do you add? Im about to fill mine up, and want to pre-mix it before. The block and everything is new, with no coolant in it whatsoever, so how much coolant...

Sorry about the caps lock in the title... This is a stock block with everything else in it aftermarket and brand new (306) 1. I need to prime my oil system, and was told i can do it with a cordless drill, and a long 1/4" extension. is this the best method? I have seen the oil priming...

I talked a buddy of mine into getting a stang when he gets back from deployment. He wants a terminator, but i also gave him the option of a Mach 1. He then asked (of course) what the differences were besides the cosmetics, and i had to pause because.. hell, i dont know... So.. what are the...

I need to grab some screws to fasten my cowl vent down, and out of all of the boxes of screws i have, none of them seem to be the right size / pitch. Does anyone have a source to buy these from, or know what size these damn things are?

Im about to bench bleed my master cylinder, when i realized that i need some plugs for the 2 ports. They are different sizes, and i can NOT find any parts store or fitting place that carries any type of fittings to block these off. I guess unless someone on here knows where i can get these...

I took out my stock cable, and replaced it with a lokar universal cable. I bought the lokar throttle cable bracket that you mount on the rear mounting stud of the carb, but the damn throttle cable is too long. Im trying to figure out how to loop it, or shorten it to make it work and not look...

This is no way a guide, but my personal experience 1. walk into garage 2. open box of Eibach springs 3. admire how shiny they are 4. open beer 5. jack front of car up, put jackstands uner subframe connectors for stability 6. remove rims, caliper and brake discs 7. place floor jack...

Ok, i bought some of the TrickFlow black powdercoated valve covers. They do not have any holes in them for PCV's or breathers. Id like to butcher them as little as possible, so i was wondering if i could just make small holes in them, and run small lines to some universal pcv valves instead of...

I was driving a buddies 93 lx this weekend, and since my car isnt running, im not used to driving a fox. This happened twice... i went to leave an intersection, and stalled it. I tried to crank the car over, and it would crank for days, but not fire up... The only way i got it to fire was...

This is on a 1991 LX I want to go pick up a set of speed bleeders for my car at lunch, and i dont have the calipers with me... I need to know what size bleeders go on the stock calipers on the front, and what size bleeders go on the drums for the rear. Any help would be rockin...

I was wrenchin on the car last night, and i have a few questions. I have a schematic that JRichker poster about what goes where electrically, but before i get into more wiring, i need something temporary to work, just to get my car cranked over to work the bugs out of it. Question 1...

Im trying to decide between getting the pro-kit, or the drag launch kit. i was told the drag launch kit sits higher, but i need to see a picture of how high it sits. Any pics would be greatly appreciated!

Im about to buy some tomorrow, and since i havent bought any sets of springs recently, im kinda out of the loop as far as who has them at a good price. Thanks in advance for any help :nice: If it happens to be in an auction link, you can PM it to me as to not get the thread closed for...

I have been playing hell trying to find some lug nuts to fit my wheels. The hub in the wheel is really deep, and i need a 2" overall length lug nut, but it cant have a bigger outside diameter than 20 millimeters. I drew a picture to help. i called several places, and all of the lug nuts im...

my clutch cable you preverts... It took me a C-Clamp to get my damn clutch cable onto my clutch fork last night. The clutch fork now sits about in the middle of the opening on the side of the bellhousing.. is it supposed to be this tight? Its a stock resurfaced flywheel, and a super king...

Does anyone know what these wires on the solenoid go to? #1 has a single black wire (either white or tan tracer) with a silver metal box (relay?) #2 has a pale yellow wire with a thick rubber / plastic end on it. #3 is a green wire with a fuseable link in it. from what ive...

Im going to run a positive (+) cable from the solenoid to my starter, and i had a question. Once i run the cable from the solenoid to my starter, can i run a cable from the starter up to the alternator? Or do i HAVE to run one from the solenoid to the alternator? My 1 wire alternator has...

I have a 91 LX ive converted to carb. there is a vacuum line on the top of the front side of the brake booster that i believe at one time hooked up to the vacuum tree on the firewall. :shrug: Since i dont have a vacuum tree anymore could someone tell me what that line coming off the booster...

Im trying to install my damn clutch cable, and i cant remember exactly where the the little mounting tab goes on the frame. It comes out of the firewall, then makes a bend and there is an "L" shaped bracket that mounts the cable either to the shock tower or frame rail..... somewhere around...

The 311 & Matisyahu concert is tomorrow night. Me and a buddy are driving over from Louisiana to go to the concert, and go hit some bars later that night. Question: Where around dallas (close to the smirnoff centre) should we go to hang out and drink a few? We are going to leave the car...