Separate names with a comma.
Discussion in '1996 - 2004 SN95 Mustang -General/Talk-' started by scupking, Apr 30, 2008.
How quick can a basic bolt on GT run 0-60? I was thinking under 5.0 seconds.
doubt it. stock is 6 flat i believe. probably mid 5s
Minor bolt ons and a friends GPS showed low 5 seconds on my 03
tested mine with one of those gtech meters and it ran 0-60 in 5.3 with a 2.2 60'
I thought stock 0-60 was 5.4.
it depends on what magazine you find that from. I have seen times from 5.4 to 6.0. the majority i have seen say 5.7 though.
i read somewhere 5.5 stock
its hard to get a definite 0-60 time because you have to launch it the same every time thats why different magazines have different times. its really tough to get a true 0-60 too many factors. I would say a bolt on GT is going to run around 5.2 to 5.5. u wont get under 5 seconds unless you are launching on slicks.
You can ESTIMATE it based on 1/8th mile times. If your mph and ET are well matched, it's probably reasonably accurate: http://www.wallaceracing.com/0-60_equation.php
That shows my 97 4.6 to have a 0-60 of 5.3 seconds and the 88 2.3 to be 4.3s.
Getting under the 5 second mark shouldnt be too bad.
There was an issue of Car & Driver I beleive (maybe Motortrend...) that took a 99 GT to 60 in 5.1 seconds, dead flippin stock.
My car ran 0-60mph in 5.22 seconds 100% bone stock (exhaust, intake, tires, EVERYTHING stock). Verified by G-tech, video, and stop watch.
Haha and by that calculator I do 0-60mph in 2.36 seconds on the bike
ha beat u with my bike that calc says mine is 2.21 on a zx6r
A bike is probably one of those cases where the mph doesn't match the ET very well... Something about not being in the power band when you launch and trying to keep the nose on the ground. Reality might be close to 3.0 seconds, which is still stupid fast.
yea my bike is rated 0-60 in 2.8. but i also have lowering straps to keep the front on the ground. otherwise the wheel comes up just going close to wot in first. just rollin on the throttle she stands lol. but my 60' is also a 1.7 on stock swingarm so im launching pretty hard with it.
I ran a 0-60 of 5.67s with a 2.1 60 ft on the street. Mods were K&N w/o air silencer, and a Catted MAC Prochamber.
When I get new tires (June), I could probably run a 2.0 on the street, and I could probably manage a sub 5.5 with practice.
Everything I've seen said 5.4 or 5.5 stock. My Gtech got 5.4 on mine with nitto street tires, and flowmasters, K&N, everything else stock.
4.59 outta my mach with a catless midpipe
Nice, I'm thinking I'm high 4s with my mods.
I got to go to the track again and see what it does now with the LT's and everything else
i checked mine when i went to the 1/8 but i had crappy traction but still came out to a 0-60 5.3 seconds. that aint bad for me