1/4 Mile estimate...

[02 Mineral Gray]

With my current mods and the VT stage 2 cams what do you guys think I will run in the 1/4?

I know the best mod is a good driver so I got that part taken care of.

Just curious what you guys think..

 

[Kilgore Trout]

12.6

 

[Mr GT 02]

12.6

liar liar pants on fire!!!!!!!!!!


What were your times before the cams?

 

[02 Mineral Gray]

I will find out Tomorrow or Thursday.

 

[02 Mineral Gray]

12.6

That would be sweet. Do you think low 13's are possible??
(13.0 to 13.2)

 

[tomustang]

you should be able to break out of the 15's

 

[02 Mineral Gray]

you should be able to break out of the 15's

I would hope so...if not I sense a bon fire in my furture...

 

[BlackenedSVT]

I'd guess a 13.5 maybe 13.4 with the stage 2 cams

Honestly though that 85mm MAF is a waste and might hurt your potential hp. You have a LOT of air flowin to that engine right now, and more so with the cams. You also should have ditched the stock H pipe because that is restricting some power.

 

[tomustang]

change back to stock MAF, and you do know you have to upgrade the internals of the heads for the stage two's right?

 

[02 Mineral Gray]

I'd guess a 13.5 maybe 13.4 with the stage 2 cams

Honestly though that 85mm MAF is a waste and might hurt your potential hp. You have a LOT of air flowin to that engine right now, and more so with the cams. You also should have ditched the stock H pipe because that is restricting some power.

Sorry I never put the catted x-pipe in my sig...
Myself..

 

[02 Mineral Gray]

change back to stock MAF, and you do know you have to upgrade the internals of the heads for the stage two's right?

Springs... right? or do I have to port and polish??
She only has 20,800 mile on her.

 

[Mr GT 02]

I never heard of HAVING to get better heads if going with the VT stage 2..U just HAVE to get the new springs......?