10 HOLE TIRES.

[CONCRETEWARFARE]

Hey guys, Im going to be buying new tires and I was just wondering what size everyone runs on there 10 holes. I currently have 225/60/15 on all 4 but im looking for something to give it a little better of a stance. So any suggestions from you guys?

 

[smr]

Arent 10 holes 7" wide or are they 8"? I dont remember because I run welds currently and will probably never go back to stocker wheels. If eight " then you could put a 255 on the back and keep your 225 in front or even go down to a 205 with taller sidewall. just my .002

 

[gunmetal5.0]

That's what i'm running on the back of mine. You can look at my sig to see.

 

[gunmetal5.0]

PS- the two pics outside the storage unit are the ones with the new wider tires on it.

 

[Maryland Stang]

225-60s on the front and 245-60s on the back.

 

[Stroker5.0]

According to BFGoodrich specs: The largest tire that will fit on a 15x7" wheel is: a 255/60-15. I have a set of welds that are the same size and this is what I have. Large foot print. nice fat side wall.

 

[85_SS_302_Coupe]

Look for a 265/50/15. Best tire size you're going to get for a 10 hole. This size works fantastic on Welds too (in fact, my old 10 holes had them, and my current Welds have them). They work just fine with a 7 inch rim and don't rub anything.