'13 Gt Specific Inspection Topics

Discussion in '2010 - 2014 Specific Tech' started by TheShabz, Oct 1, 2012.

  1. TheShabz

    TheShabz Member

    Aug 5, 2012
    Likes Received:
    Trophy Points:
    Hi all,

    The wait is nearly over and I'll be picking up my '13 GT from the dealership in the next 10-14 days. In the meantime, I'd like to know if there's anything specific to this car that I should be looking for during my inspection and test drive that I might miss if I wasn't specifically looking for it. I have a standard checklist that I've used for all the family's cars that's served us well. I don't want to miss anything big that's specific to the '13 GT or to mustangs in general. Thanks.
  2. Husky44

    Husky44 Active Member

    Sep 27, 2006
    Likes Received:
    Trophy Points:
    Only thing specific to look for that I know of is to check the master cylinder level to ensure it's not overfilled. Lots of folks having problems with that, at least on the 500s.

    I can tell you that the best prep I did was to download the owners manual and read through that a few times. These things are incredibly complex.

Share This Page