Expired 1973 Mach 1 Fastback $2000 Southeast Sav. Ga

Discussion in 'Classic Mustangs For Sale' started by Walter Sparks, Jun 27, 2013.


  1. Walter Sparks

    Walter Sparks Member

    Joined:
    Jun 22, 2013
    Messages:
    38
    Likes Received:
    0
    Trophy Points:
    7
    I have a 1973 Mustang Mach 1 Fastback. The car is almost complete. I will be removing the AC bracket and will be keeping the dash. I do have a good condition Grande dash that I will let go for a reasonable price. It is a 4V car but it has a 2V 351 Cleveland engine in it now. I do not now the condition of the engine and tranny or rear end. I was told that the engine will run.

    mustang 001.jpg mustang 002.jpg mustang 003.jpg mustangmach1 022.jpg mustangmach1 024.jpg mustangmach1 025.jpg june2013 413.jpg june2013 418.jpg june2013 420.jpg june2013 422.jpg


    I would be willing to try to get it to crank and possibly test drive if you are a serious buyer, I just been so busy I have had no time to mess with it. This car is a complete car minus the things already mentioned and the front windshield is missing. The rest of the glass is in good usable condition. the doors look ok the front fenders are ok drivers side has a little rusted out place on the bottom. A new trunk pan has been installed, I also have new tail light pan and the pan that goes under that one. Tail lights are in good shape, one lens looks like some chemical has messed it up some, but it is usable. The hood is in good shape. The trunk lid is pretty rusted out. The floor pans are in good shape and look to be original. If you want specific pictures or numbers just ask and I will get them ASAP, but I have been slammed with work lately so there could be a delay sometimes. VIN 3F05Q202576 . It has front disc brakes that work.
    #1
  2. Walter Sparks

    Walter Sparks Member

    Joined:
    Jun 22, 2013
    Messages:
    38
    Likes Received:
    0
    Trophy Points:
    7
    I am willing to part this car out. Contact me if you are interested in a specific part.
    #2
  3. Walter Sparks

    Walter Sparks Member

    Joined:
    Jun 22, 2013
    Messages:
    38
    Likes Received:
    0
    Trophy Points:
    7
    I did some checking and the car has a FMX tranny and a 9" rear end. As soon as I finish with my other one I will see If I can get this thing running. I am actually considering restoring it myself. I also will not be using the mach dash in my Grande. So it would come with the mach dash which is in good shape.
    #3
  4. Walter Sparks

    Walter Sparks Member

    Joined:
    Jun 22, 2013
    Messages:
    38
    Likes Received:
    0
    Trophy Points:
    7
    I tried to start the engine yesterday. It tries to start but stumbles and dies after about 2 seconds. I am not sure whats up but I would assume the engine will need rebuilding.
    #4

Share This Page