Dan95-5.0
Active Member
that is with the stall. heres a list of stuff i had at the time of the dyno
CAI
FOX throttle body swap (stock TB, stock fox upper intake)
underdrive pulleys
msd ignition
NO EGR/AIR (gutted smog pump)
2 1/4 h-pipe (no cats)
2 1/2 mac catback
3000 stall Street Edge converter
Transgo shiftkit
upgraded accumulators and deepsump pan
i had a exhaust leak at the time. minor but noticable
since then,
3.73's with T/A girdle, new bearings
Fox MAC unequal 1 5/8 headers
14* timing
i believe thats it
the car stopped pulling at 4300 RPM, stock heads and intake probably choked it off.
the guys at the dyno said with a tune, it should gain some more. i dynoed with other mustangs but didnt get a chance to see there results to compare.
it was nice to hear my car on the dyno. it was loud!!!! people started asking what kind of exhaust was on it
i was a little disapointed in the torque number but a tune should bring that back up
CAI
FOX throttle body swap (stock TB, stock fox upper intake)
underdrive pulleys
msd ignition
NO EGR/AIR (gutted smog pump)
2 1/4 h-pipe (no cats)
2 1/2 mac catback
3000 stall Street Edge converter
Transgo shiftkit
upgraded accumulators and deepsump pan
i had a exhaust leak at the time. minor but noticable
since then,
3.73's with T/A girdle, new bearings
Fox MAC unequal 1 5/8 headers
14* timing
i believe thats it
the car stopped pulling at 4300 RPM, stock heads and intake probably choked it off.
the guys at the dyno said with a tune, it should gain some more. i dynoed with other mustangs but didnt get a chance to see there results to compare.
it was nice to hear my car on the dyno. it was loud!!!! people started asking what kind of exhaust was on it
i was a little disapointed in the torque number but a tune should bring that back up