Hi all, I have been gone from here for a while. I've Been over on the Tweecer site.
Anyway, I hope you can help me with something. I have a set of DSS 347 Rods that use Stock 302 Rod journals The part # on the pistons are 4337 0.30. I have purchased a new Eagle Crank ( Part# Z10323400 #65) with .125 radius on the Rod. Apparently Hawks cranks use the Chevy size Rod Journals.
My question is about the correct bearings for these Rods. Hawks recommends using the Clevite 77 CB1227P rod Bearings. But these are the Chevy bearings. Does anyone know of a bearing I can use to go with the stock 302 rod and the chevy size journal on the crank. Or am I SOL and need a different crank.
Thanks
Anyway, I hope you can help me with something. I have a set of DSS 347 Rods that use Stock 302 Rod journals The part # on the pistons are 4337 0.30. I have purchased a new Eagle Crank ( Part# Z10323400 #65) with .125 radius on the Rod. Apparently Hawks cranks use the Chevy size Rod Journals.
My question is about the correct bearings for these Rods. Hawks recommends using the Clevite 77 CB1227P rod Bearings. But these are the Chevy bearings. Does anyone know of a bearing I can use to go with the stock 302 rod and the chevy size journal on the crank. Or am I SOL and need a different crank.
Thanks
