.60/.63 T3 turbo from SVO, wastegate setting?

Discussion in '2.3L (N/A & Turbo) Tech' started by spitz7985, Jul 7, 2004.


  1. spitz7985

    spitz7985 New Member

    Joined:
    Jul 7, 2004
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    0
    What is the stock internal wastegate in an SVO .60/.63 T3 turbo set at? I have no idea what year the turbo is from; I was told that it is from an SVO. I was also told it's probably set for 10psi. Thanks guys.
  2. mr_woodster

    mr_woodster Active Member

    Joined:
    Jul 28, 2003
    Messages:
    1,316
    Likes Received:
    0
    Trophy Points:
    36
    usually 9-10psi
  3. Stinger

    Stinger Founding Member

    Joined:
    Jul 7, 2001
    Messages:
    7,726
    Likes Received:
    0
    Trophy Points:
    76
    8-10 is what I've found...it can be raised beyond that but not lowered below it.
  4. mr_woodster

    mr_woodster Active Member

    Joined:
    Jul 28, 2003
    Messages:
    1,316
    Likes Received:
    0
    Trophy Points:
    36
    my turbo ran 10 psi with no dp , then put a patched crush bend on it and it went to 9ish psi ...it can be lowerd, sorta ;)

Share This Page