9" Pumpkins

Discussion in 'Engine and Power Adder' started by 96 DOHC Cobra, Feb 16, 2008.

Thread Status:
Not open for further replies.
  1. 28 spline Detroit Locker w/ 3.89s (like new)... $500 SOLD
    28 spline Detroit Locker w/ 4.11s (slightly rusted)... $300
    31 spline traction lok w/ 4.11s... $350
    31 spline traction lok w/ 3.50s... $300
    31 spline traction lok w/ 3.00s... $250
    28 spline traction lok w/ 3.50s... $350
    28 spline traction lok w/ 3.25s... $300

    Also have 9" housings
    71-73 Mustang... $100
    65-66 Mustang (not original)... $300
    57-59 Ford (w/ axles and brakes, no pumpkin)... $300

    shipping extra
     
  2. do you have anything for the 8 inch?
     
  3. Sorry, nothing for the 8" right now.
     
  4. Interested in this one....any chance you have 65/6 length axles to pair it up with? (the axles from the 57/9 would also work)

    28 spline traction lok w/ 3.50s... $350

    I assume this is used stuff as well....but just so I know...it is the housing, the ring, the track lok and assembled and assumed working?
     
  5. I have 31 spline axles that match the housing (sold separately). The 57-59 axles that I have are "big bearing" so they won't work in a stock Mustang housing. The parts are used but in good condition. The pumpkins are complete as removed from a vehicle including the center housing, traction lok unit and ring & pinion. Still assembled.
     
  6. PM sent.

    Axles will be used in a 57/9 small bearing 9 inch case so the ones you mention that are 31 spline would prob work. I'll just need to dig out the specs to get the right replacement bearing from Napa
     
Thread Status:
Not open for further replies.