94 cobra - differential cover/girdle clearance

Discussion in '1994 - 1995 Specific Tech' started by tomc3, Nov 6, 2011.


  1. tomc3

    tomc3 New Member

    Joined:
    Jun 5, 2011
    Messages:
    26
    Likes Received:
    0
    Trophy Points:
    1
    got a 94 cobra, lowered about 2 inches and considering getting a diff cover that will preload the diff bearings - looking at LPW (preferred), as well as FRPP and Drake. my main concern is clearance - looking at the spacing between stock cover and the area that the spare sits in, I'm not sure if there is enough clearance. Anyone with a lowered 94 and has an aftermarket diff cover to comment on any clearance issues?
    #1
  2. Last5.0

    Last5.0 Active Member

    Joined:
    Nov 10, 2003
    Messages:
    413
    Likes Received:
    0
    Trophy Points:
    26
    I have a MAC cover and it has hit and left a T shaped dent near the front drivers side of my spare tire well. I noticed it when going over big bumps. The MAC piece is very beefy. I have a Trick Flow (or Summit brand) cover on my '02 which is lowered also and it hasn't hit but it's not lowered as much as my '95.

    I think they make "low profile" covers now for the '05+ models that should clear.
    #2
  3. revhead347

    revhead347 I have face herpes.

    Joined:
    Jun 14, 2004
    Messages:
    6,462
    Likes Received:
    255
    Trophy Points:
    124
    There is a company that sells extra clearance girdles on ebay. I can't remember the name of them though. LMR, or something like that.

    Kurt
    #3

Share This Page