(abs) problem

Baz_One

New Member
Aug 12, 2006
21
0
0
hello everyone,
I have irritating problem, I bought HID xenon kit, everything is okay with it, they looks very good, 8000k shines very well but my problem is, when i start engine and turn lights ON automaticly my ABS light turns ON too and I loose ABS :/, only way to pass ovet this issues is turn lights first and than start engine, but like I said this is very irritating problem...

did any one have something like this ? what can I do with this ?

sorry about my english.
 
  • Sponsors (?)


hello everyone,
I have irritating problem, I bought HID xenon kit, everything is okay with it, they looks very good, 8000k shines very well but my problem is, when i start engine and turn lights ON automaticly my ABS light turns ON too and I loose ABS :/, only way to pass ovet this issues is turn lights first and than start engine, but like I said this is very irritating problem...

did any one have something like this ? what can I do with this ?

sorry about my english.

I you have any of those wires from the HID's running by an abs wires that will happen. Any wire with current passing threw it induces a electro magnetic feild around it. Higher current high field. ABS signal operates in milivolts so a strong enough wire like ignition or HID's will cause this problem. I have seen it in the field. Good luck.