auto dimming mirror swap

[doc stang]

if one were to want to move one of teh electrochromographic (autodimming) rearview mirrors, (found in a stang with the comfort group), to a different stang with the manually dimmed mirror . . .

any idea how hard this would be?
how much wire would need to be taken from the donor?

i.e. just enough wire to splice into the dome lights' wire up there? or would it require a longer tracing of wires, to a fuse box or pcm, or someplace else?
doc

 

[Reverendbiker]

I'm not exactly answering your question, but you might get enough information from my article on installing a Gentex (Mito) mirror. Here's the write-up:
Gentex Mirror Install

 

[doc stang]

I'm not exactly answering your question, but you might get enough information from my article on installing a Gentex (Mito) mirror. Here's the write-up:
Gentex Mirror Install

it's perfect, thanks,
doc