Back To The Shop She Goes...

Discussion in 'SN95 4.6L Mustang Tech' started by Three50won, May 5, 2014.


  1. Three50won

    Three50won Member

    Joined:
    Jul 11, 2010
    Messages:
    805
    Likes Received:
    17
    Trophy Points:
    19
    Well I'm gonna have to drop my 03 GT back off at the shop again. I keep getting a Bank 1 Sensor 2 check engine light. I replaced the sensor but the CEL persists. I wiped the code a few times and it keeps coming back. It first happened a week ago. I was driving and smelled some smoke. I stopped and noticed a moderate amount of smoke coming from the driver's side wheel well. So AFter it cleared I drove off...and now I'm thinking that somehow a part of the O2 sensor wire on the transmission harness came into contact with something hot and got eaten away. I wanted to do a scan to see if the sensor is picking any info up at all just to be sure. But I can't get my hands on a scan tool. I also crawled under the car to see if anything looked suspicious but everything looked intact. In fact, nothing looks out of the ordinary at all. So I will drop her off today and have her looked at. Any advice?
    #1

Share This Page