backspace question

[legalize420]

for the sn95 with an 8" rim how much do you need? what about with a 10"?

 

[95Vert]

What? how much of what do you need?

 

[legalize420]

What? how much of what do you need?

backspacing, or rearspacing whatever its called

 

[95Vert]

Not sure I understang your question, but you have enough with both size wheels. Are you talking about wheel spacers? Cause if that's the case, some people on here have 3/4 and others up to an 1". If that's not what you're looking for, then disregard.

 

[legalize420]

Not sure I understang your question, but you have enough with both size wheels. Are you talking about wheel spacers? Cause if that's the case, some people on here have 3/4 and others up to an 1". If that's not what you're looking for, then disregard.

well i dont know much about it but i read somewhere that we need 5 1/2 or 6 1/2 for a 10" rim in order for it not to stick out. im tring to find out about the 8".

 

[95Vert]

Well, the stock wheels are 8" and we don't need anything. Some else chime in, I have no idea what's going on.

 

[Blackened302]

chime






hehe, just joking. so what do you want your wheels to do, stick out and be flush with the fender, or not stick out and be tucked inside the fender?

 

[legalize420]

chime






hehe, just joking. so what do you want your wheels to do, stick out and be flush with the fender, or not stick out and be tucked inside the fender?

i would prefer flush or tucked. i was thinking about just getting 2 rims for track use. not sure yet, i might just get 2 nittos and call it a day.

 

[legalize420]

where would 4 1/8 on a 8" rim put me. then if it were 4" would it be in more or out more?

 

[legalize420]

would that work with a mt et street drags in the 8.5 tread width. size 26 x 10.5 x 15?