I installed a 65mm BBK throttle body on my 04 Cobra and it runs fine except the idle hands at 1500. If I blip t6he throttle it goes down to 1000 and then slowly drops to 750. I have set the TPS from .82 to .98 and adjusted the throttle stop as BBK recommends (listed below) and looser to no avail. Any Ideas?
BBK Idle Stop Adjustment
With Engine Off set stop to .010 cleatance between stop screw and linkage and then turn in 1 complete turn.
BBK Idle Stop Adjustment
With Engine Off set stop to .010 cleatance between stop screw and linkage and then turn in 1 complete turn.
