BBK long tubes - what angle are the O2 bungs located?

[rockin_rick]

I'm considering getting a set of BBK long tubes for my 94. I am wondering at what position the bungs for the long tubes are at. From behind the motor, looking into the collector, are they on the top (12 O'clock) or the sides (9 or 3 O'clock) or somewhere inbetween? What clock position would you estimate each is in?

I am wondering because I am going to a dual wideband setup to replace and emulate my stock O2's. The widebands need to be installed somewhere inbetween 10 and 2 o'clock positions... My mac's right now have the drivers side header at 9 o'clock, which is incompatible with WBs.

Thanks,
Rick

 

[95cobra50]

driver is 3 and pass. is 9 if i do remember correctly

 

[Rootus]

driver is 3 and pass. is 9 if i do remember correctly

You are correct sir, they point straight in.

 

[rockin_rick]

Thanks guys, obviously not the answer I was hoping for, but I'm glad to know.

Is there room to put a bung and a WB at 10 - 2 on these?

Rick

 

[Grn92LX]

Yes, theres plenty of room for a wideband bung. Mines on the drivers side collector just behind the stock bung and a little to the top. If I remember exactly, it was between 1 o'clock and 2 o'clock.