BRAKE PART ID HELP!!!!!

[wgungho]

I have a rear disc conversion setup I bought a while back from another Stangnet member. I no longer have his email. I'm trying to ID the parts he sold me.
The brackets bolt to an 8.8 rear. They have no numbers, but are cast-marked "Ford Motorsport", and LH and RH. They have no "ears" for mounting shields. The face of the holes used to bolt to the rear, and the face of the holes used to mount the calipers have approx. 7/8" offset, similar to the 4-lug rear brackets offered by NorthRacecars.com. They appear to be cast steel, and are heavy duty thick. Again, there are no numbers.
The rotors measure approx 10 1/8" x 15/16" and are directionally vented. They're marked KH9C29 and KH9M02.
The calipers are marked Ford/Varga/VFCC2307.8&VFCC2306.1. Additional marks on a different face are "IND.BRAS.243?&225B.
This setup is suposed to bolt to the stock length axles.
Any help would be greatly appreciated.

Thanks
Thom

 

[trbkrb]

Again sounds like the 4 lug disc setup Ford sold using the Turbocoupe calipers and rotors. Several people have asked about IDing this setup recently on here and Corral. Here is a post with pictures:

http://www.corral.net/forums/showthread.php?p=4050030#post4050030

 

[wgungho]

That's exactly the setup I have!!! Many thanks!!!
Thom