Building a 331 from chp, using a stock block lol.. heads are the world products winsor jr heads ported manley valves, comp spings locks and retainers harland sharp roller rockers 1.6 with trw guide plates, i am also running a ported gt40 cobra intake manifold for now. 30lb injectors, etc i do plan on runnin some boost, like 6-10 psi, so iam going with dished pistons keeping my compression under 10:1, but not lower then 9:1
now since my oil pump just went out and toasted my e303 cam, crank and 3 rods i am starting out new, any suggestions for a good cam.
now since my oil pump just went out and toasted my e303 cam, crank and 3 rods i am starting out new, any suggestions for a good cam.
