Cam Install Prices.

Discussion in 'SN95 V6 Mustang Tech' started by usaf2008, Dec 14, 2003.


  1. usaf2008

    usaf2008 New Member

    Joined:
    Nov 28, 2003
    Messages:
    13
    Likes Received:
    0
    Trophy Points:
    0
    I know there was a recent group of people who just bought some cams, so i was wonderin how much it cost to have it installed. I was lookin at gettin some cams but i got to see if its in my budget cause i figure the install price was high. If someone could tell me how much it cost to install the cams that'd be great. It'd be that package deal from rpm-mustangs that comes with the springs and pushrods, dont know if that effects install price though.
    #1
  2. GREENBIOCH

    GREENBIOCH Founding Member

    Joined:
    Mar 23, 2002
    Messages:
    1,242
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    In an Igloo
    I don't know install price, the springs and pushrods shouldn't change the price since there in the motor already. I would say it wou;ld have to be pricey. I bought one of those cams, except I'm installing my own cam to save on labour cost. I figure it isn't too difficult, but it does look time consuming.

    Try phoning a local shop that does engine building and blueprinting and stuff and see what they quote you to install a cam?
    #2
  3. Jarrell

    Jarrell New Member

    Joined:
    Aug 13, 2003
    Messages:
    326
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Livermore, CA
    I'm installing my own too.
    I belive the costs are 400 for the cam
    and 500 for the cam and springs job.
    Better to do the work urself imo.
    #3
  4. SpectorV

    SpectorV Founding Member

    Joined:
    Sep 3, 2000
    Messages:
    1,872
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Florence, Alabama
    300-400 bucks for a cam install~ if you dont put on new heads and intakes you will just have to pay 400 more to have it all done again....
    #4
  5. 00StangV6Coupe

    00StangV6Coupe Founding Member

    Joined:
    Mar 18, 2002
    Messages:
    374
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Greensburg, PA
    You don't need to take off our heads to put in the cam. Still either way, its a lot smarter to do the intake/heads at the same time if you plan on doing it.
    #5
  6. genericstang

    genericstang New Member

    Joined:
    Dec 27, 2002
    Messages:
    120
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Marietta. GA
    what kind of cams are available? can anyone recommend a good one please? link? :nice: :nice:
    #6
  7. 00StangV6Coupe

    00StangV6Coupe Founding Member

    Joined:
    Mar 18, 2002
    Messages:
    374
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Greensburg, PA
    #7

Share This Page