cam selction

[1fastsn95]

Help me out folks! Im just about ready to assemble the new 308 but Im not sure what type/brand/style cam to go with. I already have a B303 cam, but its kinda outdated. I like the way the bcam sounds, but I know I can go bigger and get more outta my motor. My pistons have valve reliefs, I have TFS TW heads (2.02/1.60) with duel springs suppositly good for .600 lift. Its an AOD car w/4.10 gears, 24 lb injectiorswith a cobra intake. I dont know jack about cams. Duration??? lobe separation???? Im clueless. This is a street/strip car(leaning more toward the street side). Give me some ideas and why you would chose that particular cam. THANKS!!!!!

 

[PeteyAce]

custom cam, from ethier fti or bennet

 

[88mouse]

A trick flow cam would go nice with there heads. I would go with there stage two cam.

 

[LS-what?]

custom cam, from ethier fti or bennet

Please spend the money its worth it

later

 

[MrXCESSIVESPEED]

I agree, a custom cam is the way to go....but if its an off the shelf you want Id go with one of the Anderson cams. They have always treated me well as a customer and the cams have always worked very well for me.

 

[5spd GT]

A trickflow stage 1 cam is not that bad, and is a great budget cam. Of course, as many know, the custom route is the best way to go. You'll be looking at $325 or so for one from www.flowtechinduction.com. It gives better performance, better driveability, better idle, better vacuum, etc. Ed Curtis does whatever you want to be done

MrXcessive - Provide some more pics of that car in your signature

 

[PUNISHER RACING]

+1 on the light green lx pics I've been drooling on myself over here, nice car

 

[MrXCESSIVESPEED]

Thanks I'll get some pics up of it, probably over the weekend.

There is a pic of it here too

http://forums.stangnet.com/showthread.php?t=539102&page=53