Canfield Head Questions

Discussion in '1994 - 1995 Specific Tech' started by BradleyMustang3, Apr 29, 2013.


  1. BradleyMustang3

    BradleyMustang3 Member

    Joined:
    Jun 5, 2011
    Messages:
    148
    Likes Received:
    0
    Trophy Points:
    17
    Canfield SBF Cylinder heads
    192cc intake, 2.02-1.60 54cc combustion chamber, manganese bronze guide cut for 1.550 spring
    valve diameters intake 2.020 exhaust 1.60

    Canfield part number 20-450-54-0

    and then has a comp cams cam

    the cylinder heads are bare and i would need valves springs rockers and so on and so forth

    what are your thoughts are these heads going to be tunable or are they gonna be less street friendly?

    800 for the heads 200 for the cam

    let me know what you think guys!

    (sorry for blowing up the threads lately im just doing a lot very quickly)
    #1
  2. revhead347

    revhead347 I have face herpes.

    Joined:
    Jun 14, 2004
    Messages:
    6,469
    Likes Received:
    257
    Trophy Points:
    124
    I have that exact same head in a 58cc. There are no tunability problems. There is also no provision for the thermactor pipe. You have to run a tap down one of the holes in the front of the head, because it is not threaded far enough down for one of the bolts. I can't remember which one.

    Kurt
    #2

Share This Page