Canton oilpan info...

[RIO5.0]

Gents.... anyone running a Canton pan?? I'm looking at P/N 15-620S and wondering if this is the one for a stock K member? If not then what P/N you use??
Thanks...

 

[95strokerPSU]

That's the one I'm running and it fit fine with a stock K member and ES motor mounts. It was close to the return line of the steering rack but had enough clearance. I've since switched to a PA Racing K member and an 03 Cobra rack and still no problems.

 

[RIO5.0]

Slick... were you able to use the Canton dipstick around your headers?? I have LT's ...sounds like some had issues ??

Thanks

 

[Stopsign32v]

I use that pan and everything works fine except for the stock Kmember brace is right slap in the way. Its gotta go

 

[RIO5.0]

chit to chit... I added a Steeda G-Trac bar to mine and left the stocker to... Must be the depth of the pan that kills em??

 

[Stopsign32v]

Yep, sadly they will both more than likely have to go. There is no-way the stock one can stay.

 

[95strokerPSU]

Yeah no vert K member brace here.

I had to bend the dipstick tube a bit to get it to clear my LTs but it can be done.

 

[RIO5.0]

Thanks guys... I have a line on one and wanted to make sure it would work...

 

[Stopsign32v]

I use the canton SS dipstick and go through the 3 and 4 runner on my LTs.