carb selection on a 351c

[mach1one]

I'm finishing up a rebuild and needed some input on the carb.

351C
Aussie 2v heads
XCellator intake
Cam is a custom grind, can't find the card, but if memory serves me it's a 240/245 dur. 560/560 lift on a 110. solid lifters.
comp 12:1 (yeah I know, heads were milled a bit more than I like but I got a deal on them)
C4/2800 stall
3.23 gears auburn locker.
It's a 73 mach 1.

The car sees some street so I didn't want a 3.73 or 4.11.

Will a holley 750 hack it? Or should I step up to a demon? Thoughts?

 

[htwheelz67]

mighty demon 750 would be my choice maybe with annular boosters.

 

[mach1one]

mighty demon 750 would be my choice maybe with annular boosters.

I've been looking harder at the demon series since I've had such bad luck with holley. They suggested the exact same thing. I believe that's what I'll be purchasing.

Thanks!

 

[rbohm]

you might consider instead using a 750 edelbrock. the edelbrock does not run fuel through a gasketed area like the holley and demon carbs do. you might also look at the carbs that carry the summit name. they are holley designed carbs, but they look like the old 4100 autolite. they are also avaiable in 750cfm. here is a link ot the carb;

Summit SUM-M08750VS - Summit Racing Street & Strip® Carburetors – SummitRacing.com