Changing Ignition Module

Discussion in 'Fox 5.0 Mustang Tech' started by Pugman1212, Jun 22, 2013.


  1. Pugman1212

    Pugman1212 New Member

    Joined:
    Jun 7, 2013
    Messages:
    25
    Likes Received:
    0
    Trophy Points:
    1
    I am changing my ignition module on the distributor of my 86 5.0. Is there a good electronic grease I should be putting on this. Does it matter what kind I use. I just bought it and its a motorcraft part and i don't want to screw up the installation
     
    #1
  2. mikestang63

    mikestang63 Mustang Master

    Joined:
    Aug 28, 2012
    Messages:
    4,051
    Showcase:
    20
    Albums:
    1
    Likes Received:
    1,148
    Trophy Points:
    154
    Location:
    In the garage
    Yes it matters. You need to use the proper dielectric grease- Radio shack sells it as QuickSilver- put a thin film on the back side. Do NOT use the stuff made for spark plug boots.
     
    #2

Share This Page