Clutch And Flywheel

Discussion in 'SN95 4.6L Mustang Tech' started by stangplease88, Jun 3, 2013.


  1. stangplease88

    stangplease88 New Member

    Joined:
    Jun 3, 2013
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    Fairless Hills, Pennsylvania
    so I have a 04 mustang gt and I am replacing the clutch and flywheel but I dont no if have a 6 or 8 bolt flywheel can anyone tell me witch one I need for my 04 gt. and what is the difference between a 10.5 and 11 inch clutch and flywheel and what would u prefer? thanks
     
    #1
  2. 95PGTTech

    95PGTTech Member

    Joined:
    Jan 28, 2008
    Messages:
    330
    Likes Received:
    18
    Trophy Points:
    19
    assuming its the stock setup, you have a 6 bolt. only the 99-01 windsor built 2vs are 8 bolt.

    either 10.5 or 11" diameter will work so long as you order both the clutch and flywheel in same diameter. there is not a significant difference, order whatever is cheaper.
     
    #2
  3. Rusty67

    Rusty67 Well-Known Member

    Joined:
    Dec 3, 2002
    Messages:
    3,617
    Likes Received:
    13
    Trophy Points:
    59
    Location:
    SB, CA
    The stock clutch on your car should be 11". Any reason not to just machine your flywheel and reuse it ?
     
    #3

Share This Page