Edelbrock performer RPM crossover

[Beef97]

Anyone either found gaskets with the crossover block or come up with a crossover block of their own? I have the RPM (not the air gap) and am not interested in keeping the exhaust crossover but can't find any gaskets that have the crossover block in them. I'm thinking of cutting small pieces of sheet metal to block them but not really sure of how much pressure goes through those crossovers. Any information would be awesome! Thanks!

 

[10secgoal]

Put a piece of aluminum can over the hole if you can't find the right gasket. That's old school cheatin' style.

 

[Beef97]

i guess there isn't much pressure going through that crossover then huh?

 

[rbohm]

no real pressure there. just use a scrap of aluminum or better sheet steel. most gasket sets i get though have the little steel piece included.

 

[mustangman1974]

Try the Ford brand. I believe the set I purchased for a 93 Mustang did not have the hole.

 

[302 coupe]

Fel Pro #1250 gasket set has a block off in it.

 

[Beef97]

thanks for the find!