fox suspension

[JAM]

i'm thinking of upgrading my 92 fox
any experience with
M5400A Bullitt kit review
i'm lookin to spend less$$
than my SN95 MM kit

 

[Shakerhood]

I have the Bullitt Kit on my 92 GT, if you dont have SN95 Front Spindles and CC plates then I would not use it, but if you do have those items I highly recommend it, just beware of the so called kits out there as most of them do not have Original Bullitt parts, many will be thrown together items from Cobras, and Mach 1s thus not having a matched set.

 

[JAM]

SHAKERHOOD?

Why the sn95 spindels?? i was going to use MMCC
what was your drop?
how much stiffer??
did you like it???

 

[Shakerhood]

The SN95 Spindles lower the mounting point of the Struts over the Fox Spindles, and the MMCCs will raise the mounting point. The reason for this is the SN95 Struts do not have as much travel as a Fox car and without using the Spindles and CC plates, you stand a good chance of bottoming out the struts which would not be good at all! With the Real Bullitt Parts on my car, it dropped about 7/8" up front and about 3/4" in the rear. The ride is better than it was stock and the handling is incredible.