FS: SBF Aluminum 205 Heads

Discussion in 'Engine and Power Adder' started by 68FBJJZ109, Jan 18, 2011.


  1. 68FBJJZ109

    68FBJJZ109 Member

    Joined:
    May 2, 2005
    Messages:
    358
    Likes Received:
    0
    Trophy Points:
    17
    I am selling these parts due to power plant change with my Shelby Clone. I prefer local pick up but will ship at buyer's expense. Please feel free to PM me with any questions or concerns, I generally check my email for notifications in the evening EST. The parts are located in Easton PA 18040.

    - Kevin

    Used:
    - Rebuilt Twisted Wedge 205 heads with Hardland Sharp Roller Rockers - 1700.00 with rockers, 1500.00 without rockers.

    CFM Flow Intake/Exhaust/Ratio
    .200: 144.4/105.2 72.9
    .300: 216.7/137.1 63.2
    .400: 267.8/1.72.2 64.3
    .500: 297.9/194.5 65.3
    .600:314.3/202.5 64.4

    195lb Beehive valve springs
    Titanium Valve Spring Retainers


    I am also selling.

    - Canton 7 qt front sump 302 baffled oil pan with pick up and windage tray- $ 250.00
    This oil pan set up is in like new condition. It was bolted to my 331 and installed into my car, though the motor was never plumbed let alone started.

    Would trade for a front sump baffled 351W pan.

    [​IMG]

    [​IMG]


    New:
    - Lakewood 5.0/5.8 SFI Steel Bellhousing for use with Tremec transmissions - $ 300.00

    [​IMG]

    [​IMG]

    [​IMG]
    #1
  2. 68FBJJZ109

    68FBJJZ109 Member

    Joined:
    May 2, 2005
    Messages:
    358
    Likes Received:
    0
    Trophy Points:
    17
    Price lowered

    CFM Flow Intake/Exhaust/Ratio
    .200: 144.4/105.2 72.9
    .300: 216.7/137.1 63.2
    .400: 267.8/1.72.2 64.3
    .500: 297.9/194.5 65.3
    .600:314.3/202.5 64.4

    195lb Beehive valve springs
    Titanium Valve Spring Retainers

    1700.00 with rockers, 1500.00 without rockers.
    #2
  3. 68FBJJZ109

    68FBJJZ109 Member

    Joined:
    May 2, 2005
    Messages:
    358
    Likes Received:
    0
    Trophy Points:
    17

Share This Page