GT-40P Heads, which motorcraft plugs?

[twotonefreak]

Hey guys need a quick recommendation for which motorcraft plugs and a recommendation for the gap for my P heads. As far as the ignition goes, I have a Blaster coil, Accell 8mm wires and Accel cap and rotor.

 

[Joes95GT]

The same ones that are in the explorer. I think they are 32C but I cannot swear by it. Call a local Ford's parts department.

Joe

 

[twotonefreak]

The same ones that are in the explorer. I think they are 32C but I cannot swear by it. Call a local Ford's parts department.

Joe

They are 32s. AGSF32FM to be exact. I work in the local Ford parts department. But I was just wanting a recommendation on wether I should go colder or hotter? Sorry about that I should have worded it differently

 

[Joes95GT]

Don't go hotter or colder usless your going to use a power adder. Those plugs are perfect for iron heads.

Joe

 

[S/CBlack95GT]

I have a set of eight AGSP-32Cs if anyone wants them. These are a "gasketed" plug that I used with my Edelbrock heads. They have 2000 miles on them. I switched to a colder 22C with my blower. $8 for shipping is all I ask. I paid $22.72 for them from Ford.